NSN 367651

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

glass material, tube,blood collecting part name assigned by controlling agency, with 0.04 ml. of 7.5% edta (k3) solution special features, 75.000 millimeters nominal overall length.

NSN 6640-01-318-9830 Datasheet

(NSN) National Stock Number

6640-01-318-9830

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6640 - Laboratory Equipment and Supplies

(NIIN) National Item Identification Number

01-318-9830

Requires Demilitarization

Yes

(INC) Item Name Code

67915

Date

Sat, Apr 28, 1990

Schedule B Code

3926909910

Material

glass

Part Name Assigned By Controlling Agency

tube,blood collecting

Overall Length

75.000 millimeters nominal

Special Features

with 0.04 ml. of 7.5% edta (k3) solution

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0067915

Cross Reference

CAGE Codes

7W260

Becton-Dickinson and Co Vacutainer Systems Div

U.s./canadian manufacturers

Freight Information

Air Commodity

MZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

00000

Water Commodity

651 - Instruments, medical and surgical

National Motor Freight Classification Item Number

056590

Schedule B & Trade

Schedule B

3926-90-9910

Description

laboratory ware

End Use

21600 - Laboratory testing instruments

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

89399

(NAICS) North American Industrial Classification System

326199

Questions & Answers

1. What is the FSCG of the NSN 6640-01-318-9830?

   The FSCG of the NSN 6640-01-318-9830 is 6640

2. Does the NSN 6640-01-318-9830 have a Schedule B code assigned?

   Yes, the Schedule B code is 3926909910

3. Does NSN 6640-01-318-9830 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6640-01-318-9830 contain precious materials?

   Precious metal content is unknown

5. Does NSN 6640-01-318-9830 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6640-01-318-9830 was assigned to the Federal Catalog?

   It was assigned 36 years ago, on Sat, Apr 28, 1990