NSN 369H3000-15

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

10.00 inches nominal overall width, 0.19lbs weight nondefinitive spec/std data, height is 0.25 inches special features, 6.00 inches nominal overall length, doubler part name assigned by controlling agency.

NSN 1560-01-725-0889 Datasheet

(NSN) National Stock Number

1560-01-725-0889

(FSG) Federal Supply Group

15 - Aerospace Craft and Structural Components

(FSC) Federal Supply Classification

1560 - Airframe Structural Components

(NIIN) National Item Identification Number

01-725-0889

Requires Demilitarization

Yes

(INC) Item Name Code

31495

Date

Fri, Dec 6, 2024

Schedule B Code

8803909060

Part Name Assigned By Controlling Agency

doubler

Nondefinitive Spec/Std Data

0.19lbs weight

Overall Length

6.00 inches nominal

Overall Width

10.00 inches nominal

Special Features

height is 0.25 inches

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0031495

Cross Reference

CAGE Codes

8V613

The Boeing Company

U.s./canadian manufacturers

1KVX4

Md Helicopters Inc

U.s./canadian manufacturers

77272

The Boeing Company

U.s./canadian manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 1560-01-725-0889?

   The FSCG of the NSN 1560-01-725-0889 is 1560

2. Does the NSN 1560-01-725-0889 have a Schedule B code assigned?

   Yes, the Schedule B code is 8803909060

3. Does NSN 1560-01-725-0889 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 1560-01-725-0889 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 1560-01-725-0889 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 1560-01-725-0889 was assigned to the Federal Catalog?

   It was assigned 1 year ago, on Fri, Dec 6, 2024