NSN 37TRX4A

An insulator having flat surfaces, with or without holes, whose thickness does not exceed 25 percent of its length or width, whichever is smaller, and whose shape is other than round. Excludes:insulator (1), spacer; insulator (1), washer; mounting pad, electrical-electronic component; plate, electrical shield; and terminal board.

3.3740 inches minimum and 3.3750 inches maximum aft of second flange diameter, standard round double flange a body style, 37 body size, 3.3850 inches minimum and 3.3900 inches maximum body diameter, 1.3120 inches nominal distance between flanges.

NSN 5990-00-085-0829 Datasheet

(NSN) National Stock Number

5990-00-085-0829

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5990 - Synchros and Resolvers

(NIIN) National Item Identification Number

00-085-0829

Requires Demilitarization

Yes

(INC) Item Name Code

27218

Date

Sun, Dec 24, 1967

Schedule B Code

9014900000

Aft Of Second Flange Diameter

3.3740 inches minimum and 3.3750 inches maximum

Body Diameter

3.3850 inches minimum and 3.3900 inches maximum

Body Size

37

Body Style

standard round double flange a

Distance Between Flanges

1.3120 inches nominal

Electrical Error Angular Range In Minutes

-8.0 to 8.0

Flange Diameter

3.6240 inches minimum and 3.6250 inches maximum

Flange Thickness

0.2500 inches nominal

Frequency In Hertz

400.0 nominal

Length

0.6550 inches nominal shoulder

Phase Shift Angle In Deg

1.000 input to output nominal

Pilot Diameter

1.6250 inches nominal

Pilot Length

0.1600 inches nominal

Material

steel corrosion resisting body

Maximum Fundamental Null Voltage In Millivolts Per Volt

35.00 output

Maximum Temp Rise

60.0 celsius

Maximum Total Null Voltage Output In Millivolts Per Volt

170.00

Mounting Surface To Terminal End Distance

4.0300 inches maximum

Overall Length

5.9200 inches nominal

Receiver Error Angular Range In Minutes

-36.0 to 36.0

Rotor Input Current Rating

1.9 amperes nominal

Rotor Input Electrical Power Rating

20.0 watts nominal

Rotor Input Voltage Rating In Volts

115.0 nominal

Second Shoulder Diameter

3.3740 inches minimum and 3.3750 inches maximum

Second Shoulder Length

0.3750 inches nominal

Shaft Diameter

Shaft Length

unable to decode

Shaft Nominal Thread Size

unable to decode

Shaft Thread Class

unable to decode

Shaft Thread Direction

unable to decode

Shaft Thread Series Designator

unable to decode

Shaft Thread Length

unable to decode

Shaft Type

unable to decode

Shoulder Diameter

3.3290 inches minimum and 3.3340 inches maximum

Specification/Standard Data

81349-mil-s-20708/70 government specification

Spline Tooth Quantity

unable to decode

Spline Tooth Diametral Pitch

unable to decode

Terminal Location

rear

Terminal Type And Quantity

5 screw

Test Data Document

"81349-mil-s-20708 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Torque Gradient Per Angular Deg

0.900 inch-ounces nominal

Transformation Ratio

0.783 rotor to stator nominal

Zss Impedance Angle In Deg

66.00 minimum and 70.00 maximum

Zss Impedance Magnitude In Ohms

3.00 minimum and 4.00 maximum

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0027218

Cross Reference

CAGE Codes

10112

General Dynamics Motion Control Llc

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

9009H

Jednolity Indeks Materialowy - Uniform Material Index

Government departments or units, including military organizations

08480

Wilson Trophy Co

U.s./canadian manufacturers

0VH01

Sae Customer Service Dept 2045

Non-manufacturers

06840

Bendix Corp the

U.s./canadian manufacturers

06845

Raytheon Company Dba Raytheon Co

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34760

Water Commodity

593 - Motors and parts, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

062120

Schedule B & Trade

Schedule B

9014-90-0000

Description

parts & accessories for direction finding compasses and other navigational instruments and appliances

End Use

22220 - Marine engines, parts

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87412

(NAICS) North American Industrial Classification System

334511

Questions & Answers

1. What is the FSCG of the NSN 5990-00-085-0829?

   The FSCG of the NSN 5990-00-085-0829 is 5990

2. Does the NSN 5990-00-085-0829 have a Schedule B code assigned?

   Yes, the Schedule B code is 9014900000

3. Does NSN 5990-00-085-0829 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 5990-00-085-0829 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5990-00-085-0829 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5990-00-085-0829 was assigned to the Federal Catalog?

   It was assigned 58 years ago, on Sun, Dec 24, 1967