NSN 37TXCB

An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes:items with more than one hole. See also insulator, disk; insulator, bead; insulator, bushing; and insulator, plate

3.3850 inches minimum and 3.3900 inches maximum body diameter, 37 body size, standard round double flange a body style, 3.3740 inches minimum and 3.3750 inches maximum aft of second flange diameter, 1.8120 inches nominal distance between flanges.

NSN 5990-00-852-2369 Datasheet

(NSN) National Stock Number

5990-00-852-2369

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5990 - Synchros and Resolvers

(NIIN) National Item Identification Number

00-852-2369

Requires Demilitarization

Yes

(INC) Item Name Code

27218

Date

Fri, Nov 25, 1966

Schedule B Code

9014900000

Aft Of Second Flange Diameter

3.3740 inches minimum and 3.3750 inches maximum

Body Diameter

3.3850 inches minimum and 3.3900 inches maximum

Body Size

37

Body Style

standard round double flange a

Distance Between Flanges

1.8120 inches nominal

Electrical Error Angular Range In Minutes

-10.0 to 10.0

Flange Diameter

3.6240 inches minimum and 3.6250 inches maximum

Flange Thickness

0.2500 inches nominal

Fragility Factor

moderately rugged

Frequency In Hertz

60.0 nominal

Length

0.6550 inches nominal shoulder

Phase Shift Angle In Deg

3.000 input to output nominal

Pilot Diameter

1.6250 inches nominal

Pilot Length

0.1600 inches nominal

Material

steel corrosion resisting body

Maximum Fundamental Null Voltage In Millivolts Per Volt

35.00 output

Maximum Temp Rise

35.0 celsius

Maximum Total Null Voltage Output In Millivolts Per Volt

170.00

Mounting Surface To Terminal End Distance

5.0600 inches nominal

Overall Length

5.9500 inches nominal

Receiver Error Angular Range In Minutes

-36.0 to 36.0

Rotor Input Current Rating

830.0 milliamperes maximum

Rotor Input Electrical Power Rating

9.25 watts maximum

Rotor Input Voltage Rating In Volts

115.0 nominal

Second Shoulder Diameter

3.3740 inches minimum and 3.3750 inches maximum

Second Shoulder Length

0.3750 inches nominal

Shaft Diameter

Shaft Length

unable to decode

Shaft Nominal Thread Size

unable to decode

Shaft Thread Class

unable to decode

Shaft Thread Direction

unable to decode

Shaft Thread Series Designator

unable to decode

Shaft Thread Length

unable to decode

Shaft Type

unable to decode

Shoulder Diameter

3.3290 inches minimum and 3.3340 inches maximum

Specification/Standard Data

81349-mil-s-20708/74 government specification

Spline Tooth Quantity

unable to decode

Spline Tooth Diametral Pitch

unable to decode

Terminal Location

rear

Terminal Type And Quantity

5 screw

Test Data Document

"81349-mil-s-20708 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Torque Gradient Per Angular Deg

0.900 inch-ounces nominal

Transformation Ratio

0.783 rotor to stator nominal

Zss Impedance Angle In Deg

30.00 minimum and 40.00 maximum

Zss Impedance Magnitude In Ohms

7.00 minimum and 10.00 maximum

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0027218

Cross Reference

CAGE Codes

28199

L3 Technologies, Inc.

U.s./canadian manufacturers

03956

Northrop Grumman Systems Corporation

U.s./canadian manufacturers

10112

General Dynamics Motion Control Llc

U.s./canadian manufacturers

07749

Bachan Aerospace Corp

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

06848

Honeywell International Inc Div Aerospace-South Bend (bendix Dr)

U.s./canadian manufacturers

9009H

Jednolity Indeks Materialowy - Uniform Material Index

Government departments or units, including military organizations

0U583

Sae International Dba Sae International

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

0VH01

Sae Customer Service Dept 2045

Non-manufacturers

81343

Society of Automotive Engineers Inc

U.s./canadian manufacturers

06840

Bendix Corp the

U.s./canadian manufacturers

82005

Allard Nazarian Group, Inc. Dba Granite State Manufacturing

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34760

Water Commodity

593 - Motors and parts, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

062120

Schedule B & Trade

Schedule B

9014-90-0000

Description

parts & accessories for direction finding compasses and other navigational instruments and appliances

End Use

22220 - Marine engines, parts

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87412

(NAICS) North American Industrial Classification System

334511

Questions & Answers

1. What is the FSCG of the NSN 5990-00-852-2369?

   The FSCG of the NSN 5990-00-852-2369 is 5990

2. Does the NSN 5990-00-852-2369 have a Schedule B code assigned?

   Yes, the Schedule B code is 9014900000

3. Does NSN 5990-00-852-2369 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5990-00-852-2369 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5990-00-852-2369 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5990-00-852-2369 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Fri, Nov 25, 1966