NSN 38602-009

An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector or printed wiring board. It is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. Excludes:lampholder; jack,telephone; jack,tip; insert electrical connector; insert module,electrical connector; connector body (as modified) and socket,plug-in electronic components. See also wiring harness (as modified) and cable assembly (as modified). For items with termination wires of more than four inches in length, see lead assembly,electrical. For items without inserts, see shell,electrical connector.

1.500 inches maximum body length, between pole one and two actuator position designation, multipole-single actuator type body style, trip-reset actuator function, magnetic blowout arc quenching method.

NSN 5925-01-059-9783 Datasheet

(NSN) National Stock Number

5925-01-059-9783

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-059-9783

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Thu, May 4, 1978

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

between pole one and two

Arc Quenching Method

magnetic blowout

Body Length

1.500 inches maximum

Body Style

multipole-single actuator type

Body Width

1.250 inches maximum

Bushing Length

0.380 inches maximum

Center To Center Distance Between Terminals Parallel To Length

0.844 inches minimum and 0.906 inches maximum

Center To Center Distance Between Terminals Parallel To Width

0.594 inches minimum and 0.656 inches maximum

Circuit Protection Type

overcurrent all locations

Fragility Factor

moderately rugged

Frequency In Hertz

400.0 all locations

Inclosure Protection Type For Which Designed

hermetically sealed and shock resistant and vibration resistant

Internal Trip Release Configuration

series trip all locations

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 toggle

Maximum Continuous Load Current Rating Per Pole

3.0 amperes ac all locations

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

1000.0 ac all locations

Mounting Facility Type And Quantity

1 threaded bushing with panel seal

Mounting Surface To Terminal End Distance

1.780 inches maximum

Nominal Thread Size

0.375 inches

Nonturn Device Diameter

0.109 inches minimum and 0.171 inches maximum

Nonturn Device Length

0.063 inches minimum and 0.125 inches maximum

Nonturn Device Radius

0.594 inches minimum and 0.656 inches maximum

Operating Voltage Type And Rating Per Pole In Volts

240.0 ac all locations

Pole Quantity

2

Reset Method

manual

Special Features

inertial delay included on item

Special Handling Feature

magnetic

Storage Type

general purpose warehouse

Terminal Type And Quantity

4 wire hook

Thread Quantity Per Inch

32

Thread Series Designator

unef

Trip Release Characteristic

time delay all locations

Trip Release Method

magnetic all locations

Trip Delay Time In Seconds Per Rated Continuous Current

0.900 minimum at 200 pct and 4.000 maximum at 200 pct all locations

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

150.0 all locations

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

SMS - Defense logistics agency, enterprise business systems

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

D9853

Rockwell Collins Deutschland Gmbh Div Rockwell Collins International & Service Solutions

Non-us manufacturer (nato), other foreign organization or codification bureaus

81541

Sensata Technologies Maryland, Inc

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-059-9783?

   The FSCG of the NSN 5925-01-059-9783 is 5925

2. Does the NSN 5925-01-059-9783 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-059-9783 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-059-9783 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-01-059-9783 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-059-9783 was assigned to the Federal Catalog?

   It was assigned 48 years ago, on Thu, May 4, 1978