NSN 386105

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

one brush p/n mgd-1012a-1,one terminal p/n mgl-2032,one locknut p/n 8x-3844,two clips p/n srp-1066,instructions p/n pp-384 general characteristics item description.

NSN 5977-01-014-3513 Datasheet

(NSN) National Stock Number

5977-01-014-3513

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5977 - Electrical Contact Brushes and Electrodes

(NIIN) National Item Identification Number

01-014-3513

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Tue, Dec 23, 1975

General Characteristics Item Description

one brush p/n mgd-1012a-1,one terminal p/n mgl-2032,one locknut p/n 8x-3844,two clips p/n srp-1066,instructions p/n pp-384

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

1081984

Cross Reference

CAGE Codes

1UVT5

Brp Us Inc

U.s./canadian manufacturers

21119

Evinrude Motors Product Group of Outboard Marine Corp

U.s./canadian manufacturers

7S2L3

Dentsply North America Llc

Non-manufacturers

80256

Outboard Marine Corp

U.s./canadian manufacturers

24975

Prestolite Electric Inc

U.s./canadian manufacturers

68505

Prestolite Electric Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5977-01-014-3513?

   The FSCG of the NSN 5977-01-014-3513 is 5977

2. Does NSN 5977-01-014-3513 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5977-01-014-3513 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5977-01-014-3513 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 5977-01-014-3513 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Tue, Dec 23, 1975