NSN 388210

90.0 degrees nominal first leg angle, 1.107 inches minimum and 1.137 inches maximum center section height, machined fabrication method, 0.500 inches nominal center section width, 0.057 inches minimum and 0.067 inches maximum center section thickness.

NSN 5340-00-700-0122 Datasheet

(NSN) National Stock Number

5340-00-700-0122

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-700-0122

Requires Demilitarization

Yes

(INC) Item Name Code

20354

Date

Tue, Jan 1, 1963

Center Section Height

1.107 inches minimum and 1.137 inches maximum

Center Section Thickness

0.057 inches minimum and 0.067 inches maximum

Center Section Width

0.500 inches nominal

Fabrication Method

machined

First Leg Angle

90.0 degrees nominal

First Leg Distance From Edge To Hole Center Along Width

0.240 inches minimum and 0.260 inches maximum

First Leg End Radius

0.280 inches minimum and 0.320 inches maximum

First Leg Hole Arrangement Style

one hole

First Leg Hole Diameter

0.198 inches minimum and 0.208 inches maximum

First Leg Distance From Edge To Hole Center Along Length

0.240 inches minimum and 0.260 inches maximum

First Leg Style

end radius

First Leg Thickness

0.057 inches minimum and 0.067 inches maximum

First Leg Width

0.560 inches minimum and 0.640 inches maximum

First Leg Length

0.611 inches minimum and 0.671 inches maximum

Material Document And Classification

ams 5504 assn std single material response

Material

steel comp 410

Second Leg Angle

90.0 degrees nominal

Second Leg Corner Radius

0.281 inches minimum and 0.344 inches maximum

Second Leg Hole Arrangement Style

two holes

Second Leg Hole Diameter

0.339 inches minimum and 0.349 inches maximum

Second Leg Length

0.768 inches minimum and 0.881 inches maximum

Second Leg Distance Between Hole Centers Along Width

2.226 inches nominal

Second Leg Distance From Edge To Hole Center Along Length

0.281 inches minimum and 0.344 inches maximum

Second Leg Distance From Edge To Hole Center Along Width

0.281 inches minimum and 0.344 inches maximum

Second Leg Width

2.507 inches minimum and 2.570 inches maximum

Second Leg Relationship To First Leg

not identical

Second Leg Style

corner radius

Second Leg Thickness

0.057 inches minimum and 0.067 inches maximum

Style Designator

double angle

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020354

Cross Reference

CAGE Codes

00088

Royal Oak Gage, Inc

U.s./canadian manufacturers

77445

Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney

Non-manufacturers

79043

The United Tool & Die Company

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5340-00-700-0122?

   The FSCG of the NSN 5340-00-700-0122 is 5340

2. Does NSN 5340-00-700-0122 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-00-700-0122 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5340-00-700-0122 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-00-700-0122 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963