NSN 39-07-A044-1350

An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes:items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes:filter, low pass and suppressor, ignition interference. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. See also limiter, electrical noise.

metal and synthetic rubber cross-sectional shape style, 1.430 inches minimum and 1.445 inches maximum aperture diameter, 1.245 inches minimum and 1.255 inches maximum center to center distance between bolt holes along width, 4 bolt hole quantity, 1.245 inches minimum and 1.255 inches maximum center to center distance between bolt holes along length.

NSN 5999-01-006-0200 Datasheet

(NSN) National Stock Number

5999-01-006-0200

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5999 - Miscellaneous Electrical and Electronic Components

(NIIN) National Item Identification Number

01-006-0200

Requires Demilitarization

Yes

(INC) Item Name Code

20281

Date

Mon, Jul 14, 1975

Schedule B Code

8543909000

Aperture Diameter

1.430 inches minimum and 1.445 inches maximum

Bolt Hole Quantity

4

Center To Center Distance Between Bolt Holes Along Length

1.245 inches minimum and 1.255 inches maximum

Center To Center Distance Between Bolt Holes Along Width

1.245 inches minimum and 1.255 inches maximum

Cross-Sectional Shape Style

metal and synthetic rubber

Cross-Sectional Thickness

0.025 inches nominal

Environmental Protection Material Location

throughout rf shielding gasket

Hole Diameter

0.120 inches minimum and 0.130 inches maximum

Material

unable to decode

Outside Corner Radius

0.120 inches minimum and 0.150 inches maximum

Outside Edge To Bolt Hole Center Distance Along Width

0.155 inches minimum and 0.158 inches maximum

Outside Edge To Bolt Hole Center Distance Along Length

0.155 inches minimum and 0.158 inches maximum

Overall Length

1.554 inches minimum and 1.570 inches maximum

Overall Width

1.554 inches minimum and 1.570 inches maximum

Precious Material

silver

Precious Material And Location

throughout rf shielding gasket silver

Style Designator

non-circular

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020281

Cross Reference

CAGE Codes

18565

Parker-Hannifin Corporation Dba Pneutronics Div Chomerics Division

U.s./canadian manufacturers

3T833

Foxtronix Inc

Non-manufacturers

07700

Technical Wire Products, Llc Dba Twp

U.s./canadian manufacturers

0U583

Sae International Dba Sae International

Civilian standards and standards organizations (ex:iso,din,bs,ansi)

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35070

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

062800

Schedule B & Trade

Schedule B

8543-90-9000

Description

electrical machines and apparatus parts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77879

(NAICS) North American Industrial Classification System

335999

Questions & Answers

1. What is the FSCG of the NSN 5999-01-006-0200?

   The FSCG of the NSN 5999-01-006-0200 is 5999

2. Does the NSN 5999-01-006-0200 have a Schedule B code assigned?

   Yes, the Schedule B code is 8543909000

3. Does NSN 5999-01-006-0200 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5999-01-006-0200 contain precious materials?

   Item contains silver.

5. Does NSN 5999-01-006-0200 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5999-01-006-0200 was assigned to the Federal Catalog?

   It was assigned 51 years ago, on Mon, Jul 14, 1975