NSN 39-10784-2

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

b-52 acft end item identification, aluminum alloy 2024-0,0.040 in. thk,2.000 in. overall width,3.000 in. overall lg,sheet is bent down 74.0 degrees in one place and 90.0 degrees in another place to form a u-shaped bracket,1st leg contains 2 parallel holes,2nd leg contains 1 hole,center section contains 5 holes general characteristics item description.

NSN 5340-01-153-9678 Datasheet

(NSN) National Stock Number

5340-01-153-9678

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-153-9678

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Wed, May 18, 1983

Schedule B Code

8302500000

End Item Identification

b-52 acft

General Characteristics Item Description

aluminum alloy 2024-0,0.040 in. thk,2.000 in. overall width,3.000 in. overall lg,sheet is bent down 74.0 degrees in one place and 90.0 degrees in another place to form a u-shaped bracket,1st leg contains 2 parallel holes,2nd leg contains 1 hole,center section contains 5 holes

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1072617

Cross Reference

CAGE Codes

81205

The Boeing Company Div Defense

U.s./canadian manufacturers

Freight Information

Air Commodity

HQ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

A - 400.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

3 - Electrostatic sensitive device (esd)

Uniform Freight Classification Item Number

49790

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

095190

Schedule B & Trade

Schedule B

8302-50-0000

Description

hat-racks, hat pegs, brackets and similar fixtures, and parts thereof, of base metal

End Use

41050 - Cell phones and other household goods, n.e.c.

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69919

(NAICS) North American Industrial Classification System

337215

Questions & Answers

1. What is the FSCG of the NSN 5340-01-153-9678?

   The FSCG of the NSN 5340-01-153-9678 is 5340

2. Does the NSN 5340-01-153-9678 have a Schedule B code assigned?

   Yes, the Schedule B code is 8302500000

3. Does NSN 5340-01-153-9678 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-01-153-9678 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5340-01-153-9678 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-01-153-9678 was assigned to the Federal Catalog?

   It was assigned 43 years ago, on Wed, May 18, 1983