NSN 3901T19

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

sliding bolt hook style designator, mrap buffalo mk2a2 end item identification, zinc alloy hook material, hooks in same plane end position, fixed design type.

NSN 5340-01-367-9487 Datasheet

(NSN) National Stock Number

5340-01-367-9487

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-367-9487

Requires Demilitarization

Yes

(INC) Item Name Code

16954

Date

Sat, Nov 21, 1992

End Item Identification

mrap buffalo mk2a2

Design Type

fixed

End Position

hooks in same plane

Hook Style Designator

sliding bolt

Material

zinc alloy hook

Material

zinc alloy blade

Overall Length

4.000 inches nominal

Rubber Covered Feature

not included

Unattached Ring

not included

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0016954

Cross Reference

CAGE Codes

39428

Mcmaster-Carr Supply Co

Non-manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49920

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095370

Questions & Answers

1. What is the FSCG of the NSN 5340-01-367-9487?

   The FSCG of the NSN 5340-01-367-9487 is 5340

2. Does NSN 5340-01-367-9487 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-01-367-9487 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5340-01-367-9487 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-01-367-9487 was assigned to the Federal Catalog?

   It was assigned 33 years ago, on Sat, Nov 21, 1992