NSN 3922-503

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

0.375 inches nominal actuator width, gray/grey single actuator actuator color, 0.375 inches nominal actuator length, rectangular actuator style, 0.546 inches nominal actuator height.

NSN 5930-01-315-8944 Datasheet

(NSN) National Stock Number

5930-01-315-8944

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-315-8944

Requires Demilitarization

Yes

(INC) Item Name Code

00406

Date

Mon, Feb 26, 1990

Schedule B Code

8536509035

Actuator Height

0.546 inches nominal

Actuator Length

0.375 inches nominal

Actuator Color

gray/grey single actuator

Actuator Style

rectangular

Actuator Width

0.375 inches nominal

Body Height

0.600 inches nominal

Body Length

0.380 inches nominal

Body Width

0.380 inches nominal

Body Style

panel mount

Contact Load Current Rating At Maximum Rated Voltage

0.250 amperes resistive dc

Inclosure Type

fully inclosed

Maximum Voltage Rating In Volts

30.0 dc

Mounting Method

panel

Nonpile-Up Contact Arrangement

unable to decode

Precious Material And Location

contact surfaces silver

Terminal Type And Quantity

2 printed circuit

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000406

Cross Reference

CAGE Codes

04426

Illinois Tool Works Inc Dba Illinois Tool Works Inc Div Illinois Tool Works

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9035

Description

switches, push-button, rated at over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-315-8944?

   The FSCG of the NSN 5930-01-315-8944 is 5930

2. Does the NSN 5930-01-315-8944 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509035

3. Does NSN 5930-01-315-8944 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-315-8944 contain precious materials?

   Item contains silver.

5. Does NSN 5930-01-315-8944 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-315-8944 was assigned to the Federal Catalog?

   It was assigned 36 years ago, on Mon, Feb 26, 1990