1. Home /
  2. FSC NSN Catalog /
  3. Switches /
  4. 394875-3

NSN 394875-3

Rotary Switch

30.0 dc at sea level contact voltage rating in volts, 200.0 milliamperes resistive load dc at sea level contact load current rating, 50.0 milliamperes resistive load ac at sea level contact load current rating, 115.0 ac at sea level contact voltage rating in volts, breaks before makes each section rear contact switching action.

NSN 5930-00-327-4471 Datasheet

(NSN) National Stock Number
5930-00-327-4471
(FSC) Federal Supply Classification
5930 - Switches
(NIIN) National Item Identification Number
00-327-4471
Requires Demilitarization
Yes
(INC) Item Name Code
02134
Date
Sun, Dec 9, 1973
Schedule B Code
8536509025
Contact Load Current Rating
50.0 milliamperes resistive load ac at sea level
Contact Load Current Rating
200.0 milliamperes resistive load dc at sea level
Contact Switching Action
breaks before makes each section rear
Contact Voltage Rating In Volts
115.0 ac at sea level
Contact Voltage Rating In Volts
30.0 dc at sea level
Detent Rotational Torque Range
+20.000 to 115.000 inch-ounces all actuators
First Flat Length
0.250 inches nominal all actuators
Flat Height
0.094 inches nominal second actuator
Flat Height
0.219 inches nominal first actuator
Hazardous Locations/Environmental Protection
dustproof
Individual Section Quantity
3
Mounting Method
threaded bushing single mounting facility
Nominal Thread Size
0.375 inches single mounting facility
Nonturn Device Radius
0.375 inches nominal at 3:00 oclock
Nonturn Device Type
tab at 3:00 oclock
Operating Temp Range
-65.0 to 85.0 celsius
Overall Diameter
1.185 inches maximum
Overall Length
3.481 inches nominal
Pole Quantity
2 first section front
Pole Quantity
2 second section front
Pole Quantity
4 third section front
Precious Material And Location
contacts silver
Precious Material
silver
Rotor Through Connection Quantity
2 first section
Rotor Through Connection Quantity
2 second section
Rotor Through Connection Quantity
4 third section
Shaft Diameter
0.250 inches nominal first actuator
Shaft Flat/Slot Angular Location
225.0 degrees from nonturn device first actuator
Shaft Flat/Slot Angular Location
315.0 degrees from nonturn device second actuator
Shaft Diameter
0.125 inches nominal second actuator
Shaft Type
round, flatted second actuator
Shaft Type
round, hollowed, flatted first actuator
Shaft Length
0.437 inches nominal first actuator
Shaft Length
0.874 inches nominal second actuator
Style Designator
tap, circular, bushing mount
Switch Actuator Indexing Position Quantity
3 second actuator
Switch Actuator Indexing Position Quantity
6 first actuator
Switch Actuator Positioning Increment
30.0 degrees all actuators
Switch Actuator Stop Device Type
fixed stop all actuators
Switch Contact Basic Design
nonpile-up symmetrical
Terminal Type
tab, solder lug
Thread Class
2a single mounting facility
Thread Length
0.437 inches nominal single mounting facility
Thread Series Designator
unable to decode
Thread Series Designator
unef single mounting facility
Throw Quantity
3 third section rear
Throw Quantity
6 second section rear
Throw Quantity
6 first section rear

Identification

Demilitarization Code
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Precious Metals Indicator
S - Item contains silver.
Hazardous Metals Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Pseudo Item Name Code
0002134

Cross Reference

CAGE Codes

00752
L3harris Technologies, Inc. Dba Harris Corp Div Antenna Products
U.s./canadian manufacturers
91812
Janco Corporation Dba Janco Corp Div Mason Controls
U.s./canadian manufacturers

Freight Information

Air Commodity
HZ -
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
National Motor Freight Class Rating
M - 85.0
Special Handling
9 - Other or no special handling required (sh)
Type of Cargo
Z - No special type of cargo code applicable
Uniform Freight Classification Item Number
34430
Water Commodity
72D - Communications/electronics, other than sigint/ew or comsec repair parts and components
National Motor Freight Classification Item Number
061360

Schedule B & Trade

Schedule B
8536-50-9025
Description
switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts
End Use
20005 - Electric apparatus
Unit of Quantity
NO
USDA
Yes
(SITC) Standard International Trade Classification
77255
(NAICS) North American Industrial Classification System
335931

Questions & Answers

  1. What is the FSCG of the NSN 5930-00-327-4471?

    The FSCG of the NSN 5930-00-327-4471 is 5930

  2. Does the NSN 5930-00-327-4471 have a Schedule B code assigned?

    Yes, the Schedule B code is 8536509025

  3. Does NSN 5930-00-327-4471 require demilitarization?

    Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

  4. Does NSN 5930-00-327-4471 contain precious materials?

    Item contains silver.

  5. Does NSN 5930-00-327-4471 contain hazardous materials?

    Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

  6. When the NSN 5930-00-327-4471 was assigned to the Federal Catalog?

    It was assigned 52 years ago, on Sun, Dec 9, 1973

Globe Transparent
Get in Touch
Looking for technical parts, product details, or custom project planning? Our team has you covered with end-to-end support every step of the way.
Contact Us

Pricing & Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.