NSN 394875-4

A rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see door, access (as modified). Excludes:all covers not specifically designed to provide access for the purposes listed above.

breaks before makes each section rear contact switching action, 200.0 milliamperes resistive load dc at sea level contact load current rating, 50.0 milliamperes resistive load ac at sea level contact load current rating, 115.0 ac at sea level contact voltage rating in volts, 30.0 dc at sea level contact voltage rating in volts.

NSN 5930-00-327-4474 Datasheet

(NSN) National Stock Number

5930-00-327-4474

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-327-4474

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Sun, Dec 9, 1973

Schedule B Code

8536509025

Contact Load Current Rating

50.0 milliamperes resistive load ac at sea level

Contact Load Current Rating

200.0 milliamperes resistive load dc at sea level

Contact Switching Action

breaks before makes each section rear

Contact Voltage Rating In Volts

115.0 ac at sea level

Contact Voltage Rating In Volts

30.0 dc at sea level

Detent Rotational Torque Range

+20.000 to 115.000 inch-ounces all actuators

First Flat Length

0.250 inches nominal all actuators

Flat Height

0.094 inches nominal second actuator

Flat Height

0.219 inches nominal first actuator

Hazardous Locations/Environmental Protection

dustproof

Individual Section Quantity

2

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Radius

0.375 inches nominal at 3:00 oclock

Nonturn Device Type

tab at 3:00 oclock

Operating Temp Range

-65.0 to 85.0 celsius

Overall Diameter

1.185 inches maximum

Overall Length

3.161 inches nominal

Pole Quantity

3 first section front

Pole Quantity

4 second section front

Precious Material And Location

contacts silver

Precious Material

silver

Rotor Through Connection Quantity

3 first section

Rotor Through Connection Quantity

4 second section

Shaft Diameter

0.250 inches nominal first actuator

Shaft Flat/Slot Angular Location

225.0 degrees from nonturn device first actuator

Shaft Flat/Slot Angular Location

315.0 degrees from nonturn device second actuator

Shaft Diameter

0.125 inches nominal second actuator

Shaft Type

round, flatted second actuator

Shaft Type

round, hollowed, flatted first actuator

Shaft Length

0.437 inches nominal first actuator

Shaft Length

0.874 inches nominal second actuator

Style Designator

tap, circular, bushing mount

Switch Actuator Indexing Position Quantity

3 all actuators

Switch Actuator Positioning Increment

30.0 degrees all actuators

Switch Actuator Stop Device Type

fixed stop all actuators

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Thread Class

2a single mounting facility

Thread Length

0.437 inches nominal single mounting facility

Thread Series Designator

unef single mounting facility

Throw Quantity

3 each section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

00752

L3harris Technologies, Inc. Dba Harris Corp Div Antenna Products

U.s./canadian manufacturers

91812

Janco Corporation Dba Janco Corp Div Mason Controls

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9025

Description

switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-327-4474?

   The FSCG of the NSN 5930-00-327-4474 is 5930

2. Does the NSN 5930-00-327-4474 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509025

3. Does NSN 5930-00-327-4474 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-327-4474 contain precious materials?

   Item contains silver.

5. Does NSN 5930-00-327-4474 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-327-4474 was assigned to the Federal Catalog?

   It was assigned 52 years ago, on Sun, Dec 9, 1973