NSN 3D23854G01

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

100.0 all capacitors dc voltage rating per function in volts, 0.740 inches minimum and 0.780 inches maximum center to center distance between mounting facilities parallel to length, encased assembly form, -10.0 to 10.0 all capacitors capacitance tolerance per function in percent, 0.01 microfarads all capacitors capacitance value per function.

NSN 5915-01-321-7378 Datasheet

(NSN) National Stock Number

5915-01-321-7378

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

01-321-7378

Requires Demilitarization

Yes

(INC) Item Name Code

05090

Date

Sat, Jun 23, 1990

Schedule B Code

8527995030

Assembly Form

encased

Capacitance Tolerance Per Function In Percent

-10.0 to 10.0 all capacitors

Capacitance Value Per Function

0.01 microfarads all capacitors

Center To Center Distance Between Mounting Facilities Parallel To Length

0.740 inches minimum and 0.780 inches maximum

Dc Voltage Rating Per Function In Volts

100.0 all capacitors

Electrical Resistance Per Function

10.0 kilohms all resistors

Mounting Facility Quantity

2

Mounting Facility Thread Size And Series/Type Designator

0.112-40 unified national coarse (unc)

Mounting Method

threaded hole(s)

Overall Height

1.110 inches minimum and 1.150 inches maximum

Overall Length

1.480 inches minimum and 1.520 inches maximum

Overall Width

0.860 inches minimum and 0.900 inches maximum

Resistor Power Dissipation Rating Per Function In Watts

0.250 all resistors

Resistance Tolerance Per Function In Percent

-2.0 to 2.0 all resistors

Schematic Diagram Designator

1 capacitor, 1 resistor

Terminal Type And Quantity

2 connector, receptacle

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0005090

Cross Reference

CAGE Codes

18323

Northrop Grumman Systems Corporation Dba Electronic Systems

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-01-321-7378?

   The FSCG of the NSN 5915-01-321-7378 is 5915

2. Does the NSN 5915-01-321-7378 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-01-321-7378 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5915-01-321-7378 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5915-01-321-7378 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5915-01-321-7378 was assigned to the Federal Catalog?

   It was assigned 36 years ago, on Sat, Jun 23, 1990