NSN 3MC12B563J

An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. Excludes:bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.

w/o mtg facilities, axial terminals body style, 0.056 microfarads single section capacitance value per section, 0.300 dissipation factor at reference temp in percent, 0.400 inches nominal body length, 0.150 inches nominal body diameter.

NSN 5910-01-067-0876 Datasheet

(NSN) National Stock Number

5910-01-067-0876

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-067-0876

Requires Demilitarization

Yes

(INC) Item Name Code

31959

Date

Wed, Oct 25, 1978

Schedule B Code

8532290040

Body Diameter

0.150 inches nominal

Body Length

0.400 inches nominal

Body Style

w/o mtg facilities, axial terminals

Capacitance Value Per Section

0.056 microfarads single section

Dissipation Factor At Reference Temp In Percent

0.300

Insulation Resistance At Reference Temp

500000.0 megohms

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

50.0 dc single section

Reliability Failure Rate Level In Percent

0.010

Reliability Indicator

established

Schematic Diagram Designator

no common or grounded electrode(s)

Specification/Standard Data

81349-mil-c-0055514/4 government specification

Terminal Diameter

0.020 inches nominal

Terminal Length

1.625 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

"81349-mil-c-55514 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-2.00 to 2.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0031959

Cross Reference

CAGE Codes

50558

Electronic Concepts, Inc.

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

51215

Boeing Company, The Dba Boeing

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-067-0876?

   The FSCG of the NSN 5910-01-067-0876 is 5910

2. Does the NSN 5910-01-067-0876 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-067-0876 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-067-0876 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-01-067-0876 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-067-0876 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Wed, Oct 25, 1978