NSN 40131002000

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

not established reliability indicator, 0.085 inches minimum and 0.105 inches maximum overall diameter, fully inclosed inclosure type, 105.0 celsius maximum operating temp, 0.240 inches minimum and 0.260 inches maximum body length.

NSN 5950-00-031-4571 Datasheet

(NSN) National Stock Number

5950-00-031-4571

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-031-4571

Requires Demilitarization

Yes

(INC) Item Name Code

06338

Date

Sat, Oct 28, 1972

Schedule B Code

8504500000

Body Length

0.240 inches minimum and 0.260 inches maximum

Inclosure Type

fully inclosed

Maximum Operating Temp

105.0 celsius

Overall Diameter

0.085 inches minimum and 0.105 inches maximum

Reliability Indicator

not established

Specification/Standard Data

96906-ms75084 government standard

Terminal Type And Quantity

2 wire lead

Test Data Document

"81349-mil-c-15305 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0006338

Cross Reference

CAGE Codes

18338

Xerox Corp Xerox Documentation and Software Services

U.s./canadian manufacturers

13499

Rockwell Collins, Inc. Dba Collins Aerospace Government Systems Div Collins Aerospace - Government Systems

U.s./canadian manufacturers

95105

Rockwell Collins, Inc. Div Collins Aerospace - Mission Systems

U.s./canadian manufacturers

04423

Telonic Berkeley, Inc. Dba Telonic Berkeley

U.s./canadian manufacturers

H0203

Thales Nederland

Non-us manufacturer (nato), other foreign organization or codification bureaus

S0522

Tadiran Ltd

Non-us manufacturer (nato), other foreign organization or codification bureaus

71279

Interconnection Products Inc

U.s./canadian manufacturers

51406

Murata Erie North America Inc Headquarters and Georgia Opns

U.s./canadian manufacturers

72259

Nytronics Inc

U.s./canadian manufacturers

00213

Struthers-Dunn Inc.

U.s./canadian manufacturers

09969

Vishay Dale Electronics, Inc.

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

96906

Military Standards Promulgated by Military Departments Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34700

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

061980

Schedule B & Trade

Schedule B

8504-50-0000

Description

inductors, nesoi

End Use

20000 - Generators, accessories

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77125

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5950-00-031-4571?

   The FSCG of the NSN 5950-00-031-4571 is 5950

2. Does the NSN 5950-00-031-4571 have a Schedule B code assigned?

   Yes, the Schedule B code is 8504500000

3. Does NSN 5950-00-031-4571 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-00-031-4571 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5950-00-031-4571 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-00-031-4571 was assigned to the Federal Catalog?

   It was assigned 53 years ago, on Sat, Oct 28, 1972