NSN 405-0091

An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector or printed wiring board. It is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. Excludes:lampholder; jack,telephone; jack,tip; insert electrical connector; insert module,electrical connector; connector body (as modified) and socket,plug-in electronic components. See also wiring harness (as modified) and cable assembly (as modified). For items with termination wires of more than four inches in length, see lead assembly,electrical. For items without inserts, see shell,electrical connector.

nonportable installation design, 3.312 inches nominal center to center distance between mounting facilities parallel to width, +750.0 to 1250.0 frequency response range in hertz, 8.0 voice coil nominal impedance rating in ohms, 3.312 inches nominal center to center distance between mounting facilities parallel to length.

NSN 5965-01-075-2188 Datasheet

(NSN) National Stock Number

5965-01-075-2188

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5965 - Microphones and Speakers Handsets Headsets

(NIIN) National Item Identification Number

01-075-2188

Requires Demilitarization

Yes

(INC) Item Name Code

15771

Date

Tue, Apr 17, 1979

Schedule B Code

8518210000

Center To Center Distance Between Mounting Facilities Parallel To Width

3.312 inches nominal

Center To Center Distance Between Mounting Facilities Parallel To Length

3.312 inches nominal

Frequency Response Range In Hertz

+750.0 to 1250.0

Impedance Rating In Ohms

8.0 voice coil nominal

Installation Design

nonportable

Mounting Facility Quantity

4

Mounting Facility Thread Size And Series/Type Designator

10-24 unified national coarse (unc)

Mounting Hole Diameter

0.180 inches nominal

Mounting Method

threaded hole(s)

Overall Depth

2.500 inches nominal

Overall Length

4.060 inches nominal

Overall Width

4.060 inches nominal

Power Rating

4.00 watts peak

Special Features

item is an unenclosed, 2 watt normal, 4 watt peak power rated loudspeaker; 8 ohm impedance rating and is fungus, blast, and water resisting

Style Designator

square

Terminal Quantity

2

Terminal Type

tab, solder lug

Test Data Document

"81349-mil-l-12606 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Transducer Length

2.125 inches nominal

Transducer Type

diaphragm

Transducer Width

2.125 inches nominal

Usage Design

indoor

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015771

Cross Reference

CAGE Codes

94990

Motorola Inc. Dba Integrated Information Systems Group

U.s./canadian manufacturers

A486G

Nimikkeistokeskus Ncb Finland

Government departments or units, including military organizations

07109

Mitek Corporation Dba Mtx/oaktron

U.s./canadian manufacturers

A00AM

E.c.a Etablissement Central des Approvisionnements des Forces Armees Royales

Military standards and standards organizations (ex:stanags,milspecs,defstans)

12763

Dynalec Corporation

U.s./canadian manufacturers

04848

Adec Inc

U.s./canadian manufacturers

80045

L3harris Cincinnati Electronics Corporation

U.s./canadian manufacturers

87771

University Sound Inc Affil of Mark Iv Industries Inc

U.s./canadian manufacturers

12020

Oak Crystal Inc

U.s./canadian manufacturers

16236

Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)

Government departments or units, including military organizations

06845

Raytheon Company Dba Raytheon Co

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

F - 150.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34920

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

062420

Schedule B & Trade

Schedule B

8518-21-0000

Description

single loudspeakers, mounted in their enclosures

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76422

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5965-01-075-2188?

   The FSCG of the NSN 5965-01-075-2188 is 5965

2. Does the NSN 5965-01-075-2188 have a Schedule B code assigned?

   Yes, the Schedule B code is 8518210000

3. Does NSN 5965-01-075-2188 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5965-01-075-2188 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5965-01-075-2188 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5965-01-075-2188 was assigned to the Federal Catalog?

   It was assigned 47 years ago, on Tue, Apr 17, 1979