NSN 406933

A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes:washer, concave, retainer, packing, and thrust type washers. See also spacer, sleeve; and spacer, stepped.

contact load current rating, unable to decode contact load current rating, breaks before makes single section rear contact switching action, 225.0 milliamperes resistive load ac at sea level contact load current rating, 500.0 milliamperes resistive load and 50.0 milliamperes inductive load dc at sea level contact load current rating.

NSN 5930-01-161-8099 Datasheet

(NSN) National Stock Number

5930-01-161-8099

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-161-8099

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Sun, Sep 11, 1983

Schedule B Code

8536509020

Contact Load Current Rating

500.0 milliamperes resistive load and 50.0 milliamperes inductive load dc at sea level

Contact Load Current Rating

unable to decode

Contact Load Current Rating

Contact Load Current Rating

225.0 milliamperes resistive load ac at sea level

Contact Switching Action

breaks before makes single section rear

Contact Switching Action

unable to decode

Contact Voltage Rating In Volts

115.0 ac at sea level

Contact Voltage Rating In Volts

28.0 dc at sea level

Contact Voltage Rating In Volts

unable to decode

First Flat Length

0.500 inches nominal single actuator

Flat Height

unable to decode

Flat Height

0.216 inches nominal single actuator

Hazardous Locations/Environmental Protection

shock resistant

Individual Section Quantity

1

Mounting Method

threaded bushing with panel seal single mounting facility

Mounting Method

unable to decode

Nominal Thread Size

0.375 inches single mounting facility

Nominal Thread Size

unable to decode

Nonturn Device Radius

0.531 inches nominal at 3:00 oclock

Nonturn Device Radius

unable to decode

Nonturn Device Type

unable to decode

Nonturn Device Type

tab at 3:00 oclock

Overall Diameter

1.375 inches maximum

Overall Length

1.937 inches nominal

Pole Quantity

1 single section front

Pole Quantity

unable to decode

Rotor Through Connection Quantity

1 single section

Rotor Through Connection Quantity

unable to decode

Shaft Diameter

0.250 inches nominal single actuator

Shaft Diameter

unable to decode

Shaft Length

unable to decode

Shaft Type

round, flatted single actuator

Shaft Type

unable to decode

Shaft Length

0.671 inches nominal single actuator

Style Designator

circular wafer, bushing mount

Switch Actuator Indexing Position Quantity

9 single actuator

Switch Actuator Indexing Position Quantity

unable to decode

Switch Actuator Positioning Increment

36.0 degrees single actuator

Switch Actuator Positioning Increment

unable to decode

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Actuator Stop Device Type

unable to decode

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Thread Class

2a single mounting facility

Thread Length

0.375 inches nominal single mounting facility

Thread Series Designator

unef single mounting facility

Throw Quantity

9 single section rear

Throw Quantity

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

12909

Cardion Inc

U.s./canadian manufacturers

20284

Aimtron Systems, Llc

Non-manufacturers

76854

Electro Switch Corp. Dba Oak Grisgsby Div Electroswitch

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-161-8099?

   The FSCG of the NSN 5930-01-161-8099 is 5930

2. Does the NSN 5930-01-161-8099 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-01-161-8099 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-161-8099 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-01-161-8099 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-161-8099 was assigned to the Federal Catalog?

   It was assigned 43 years ago, on Sun, Sep 11, 1983