NSN 4112281-102

An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector or printed wiring board. It is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. Excludes:lampholder; jack,telephone; jack,tip; insert electrical connector; insert module,electrical connector; connector body (as modified) and socket,plug-in electronic components. See also wiring harness (as modified) and cable assembly (as modified). For items with termination wires of more than four inches in length, see lead assembly,electrical. For items without inserts, see shell,electrical connector.

220.000 picofarads single section capacitance value per section, 0.172 inches nominal body height, 0.344 inches nominal body length, 0.078 inches nominal body width, w/o mtg facilities, terminals on opposite surfaces body style.

NSN 5910-00-237-3210 Datasheet

(NSN) National Stock Number

5910-00-237-3210

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-237-3210

Requires Demilitarization

Yes

(INC) Item Name Code

00004

Date

Wed, Jan 12, 1972

Schedule B Code

8532290040

Body Height

0.172 inches nominal

Body Length

0.344 inches nominal

Body Width

0.078 inches nominal

Body Style

w/o mtg facilities, terminals on opposite surfaces

Capacitance Value Per Section

220.000 picofarads single section

Dissipation Factor At Reference Temp In Percent

0.1000

Features Provided

hermetically sealed case

Insulation Resistance At Maximum Operating Temp

10000.0 megohm-microfarads

Insulation Resistance At Reference Temp

100000.0 megohm-microfarads

Material

glass case

Mil-Std-1276 Wire Lead Type Designator

c

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

300.0 dc single section

Quality Factor At Reference Temp

1000.0000

Reliability Indicator

established

Reliability Failure Rate Level In Percent

1.0000

Schematic Diagram Designator

electrode(s) grounded to case, w/gnd terminal

Specification/Standard Data

81349-mil-c-23269/1 government specification

Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius

140.0 single section

Terminal Diameter

0.020 inches nominal

Terminal Length

1.125 inches minimum

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

"81349-mil-c-23269 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-5.00 to 5.00 percent single section

Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius

-25.0 to 25.0 single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000004

Cross Reference

CAGE Codes

05869

Raytheon Company Div Rmd Strategic

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-237-3210?

   The FSCG of the NSN 5910-00-237-3210 is 5910

2. Does the NSN 5910-00-237-3210 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-00-237-3210 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-237-3210 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-00-237-3210 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-237-3210 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Wed, Jan 12, 1972