NSN 41388

0.730 inches minimum and 0.770 inches maximum center section width, 0.375 inches nominal first leg distance from edge to hole center along width, one hole first leg hole arrangement style, 0.059 inches minimum and 0.065 inches maximum center section thickness, 29.0 degrees minimum and 31.0 degrees maximum first leg angle.

NSN 5340-01-295-7963 Datasheet

(NSN) National Stock Number

5340-01-295-7963

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-295-7963

Requires Demilitarization

Yes

(INC) Item Name Code

20354

Date

Sat, Mar 11, 1989

Center Section Thickness

0.059 inches minimum and 0.065 inches maximum

Center Section Width

0.730 inches minimum and 0.770 inches maximum

First Leg Angle

29.0 degrees minimum and 31.0 degrees maximum

First Leg Distance From Edge To Hole Center Along Width

0.375 inches nominal

First Leg Hole Arrangement Style

one hole

First Leg Hole Diameter

0.198 inches minimum and 0.208 inches maximum

First Leg Distance From Edge To Hole Center Along Length

0.200 inches minimum and 0.240 inches maximum

First Leg Style

square

First Leg Thickness

0.059 inches minimum and 0.065 inches maximum

First Leg Width

0.730 inches minimum and 0.770 inches maximum

Material

steel

Mounting Hole Type

plain

Second Leg Angle

29.0 degrees minimum and 31.0 degrees maximum

Second Leg Distance Between Hole Centers Along Length

1.142 inches nominal

Second Leg Distance Between Hole Centers Along Width

0.139 inches nominal

Second Leg Hole Arrangement Style

2 slots

Second Leg Distance From Edge To Hole Center Along Length

0.312 inches nominal

Second Leg Distance From Edge To Hole Center Along Width

0.375 inches nominal

Second Leg Width

0.730 inches minimum and 0.770 inches maximum

Second Leg Relationship To First Leg

not identical

Second Leg Slot Length

0.336 inches minimum and 0.356 inches maximum

Second Leg Slot Width

0.168 inches minimum and 0.178 inches maximum

Second Leg Style

square

Second Leg Thickness

0.059 inches minimum and 0.065 inches maximum

Style Designator

double angle

Surface Treatment

passivate

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020354

Cross Reference

CAGE Codes

05869

Raytheon Company Div Rmd Strategic

U.s./canadian manufacturers

24235

Williams International Co., L.l.c.

U.s./canadian manufacturers

73386

Freed Transformer Co

U.s./canadian manufacturers

Freight Information

Air Commodity

AZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

Q - 70.0

National Motor Freight Class Rating

Q - 70.0

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5340-01-295-7963?

   The FSCG of the NSN 5340-01-295-7963 is 5340

2. Does NSN 5340-01-295-7963 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-01-295-7963 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5340-01-295-7963 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-01-295-7963 was assigned to the Federal Catalog?

   It was assigned 37 years ago, on Sat, Mar 11, 1989