NSN 4171306-93

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.138 inches nominal body diameter, 130.0 ambient temp in deg celsius at zero percent rated power, 70.0 celsius ambient temp at full rated power, 0.375 inches nominal body length, 3.300 kilohms electrical resistance.

NSN 5905-00-726-9795 Datasheet

(NSN) National Stock Number

5905-00-726-9795

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5905 - Resistor

(NIIN) National Item Identification Number

00-726-9795

Requires Demilitarization

Yes

(INC) Item Name Code

00126

Date

Fri, Mar 29, 1968

Schedule B Code

8533290000

Ambient Temp At Full Rated Power

70.0 celsius

Ambient Temp In Deg Celsius At Zero Percent Rated Power

130.0

Body Diameter

0.138 inches nominal

Body Length

0.375 inches nominal

Electrical Resistance

3.300 kilohms

Inclosure Type

encapsulated

Power Dissipation Rating In Watts

0.500 free air

Resistance Tolerance In Percent

-5.000 to 5.000

Style Designator

axial terminal each end

Terminal Type

wire lead

Test Data Document

"81349-mil-r-39008 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000126

Cross Reference

CAGE Codes

05869

Raytheon Company Div Rmd Strategic

U.s./canadian manufacturers

06481

Northrop Grumman Systems Corporation Div the Navigation, Targeting and Survivability Division

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35140

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

062960

Schedule B & Trade

Schedule B

8533-29-0000

Description

fixed resistors, for a power handling capacity exceeding 20 w, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77232

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5905-00-726-9795?

   The FSCG of the NSN 5905-00-726-9795 is 5905

2. Does the NSN 5905-00-726-9795 have a Schedule B code assigned?

   Yes, the Schedule B code is 8533290000

3. Does NSN 5905-00-726-9795 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5905-00-726-9795 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5905-00-726-9795 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5905-00-726-9795 was assigned to the Federal Catalog?

   It was assigned 58 years ago, on Fri, Mar 29, 1968