Request Pricing & Availability

NSN: 5315-00-001-4672
Part Number(s):
Quantity:
Company:
Name & Email:
Phone:
Order Terms | Privacy Policy    

Cross Reference These part numbers have the same form, fit, and function of 420827-1

Item Number Cage
420827-1 80020

Characteristic Codes 420827-1 spec. code meanings

Code Translation
ABNZ A measurement of the longest effective dimension of an item.
ABMZ The length of a straight line which passes through the center of a circular figure or body, and terminates at the circumference.
CRDY Indicates the location of the first end.
AAGZ The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.
MDCL The specification, standard, or manufacturers reference, and the classification designation, such as class, condition, temper, and the like, that identifies the material.
MATT The chemical compound or mechanical mixture properties of which the item is fabricated.
CQBB Indicates whether or not the second end is identical to the first end.
ABHP The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
STYL The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
STDC The specification, standard, or manufacturers reference, and the classification designation, such as type, class, grade, and the like, that identifies the surface treatment material.
SFTT The metallic, nonmetallic, and/or chemical properties with which the item is plated, dipped, and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
TEST The specification, standard, drawing, or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

420827-1 Headless Grooved Pin

Mfr. Cage 80020

Specification

Length: 10-3/4"

ABNZ Effective Length
From 10.468" and 10.483"
ABMZ Diameter
From 0.9973" and 0.9986"
CRDY First End Location
Both ends
AAGZ First End Style
Chamfered
CRMG First End Taper Angle
45.0 degrees
AMCS First End Taper Length
0.031 inches
MDCL Material Spec
Qq-s-624 comp 4130 fed spec single material response
MATT Material
Steel comp 4130
CQBB Second End Relationship With First End
Identical
ABPD Second Undercut Width
From 0.046" and 0.049"
ABHP Overall Length
10.750 inches
STYL Style Designator
Groove
STDC Surface Treatment Spec
Qq-p-416,ty 1,cl 1 fed spec single treatment response
SFTT Surface Treatment
Cadmium
TEST Test Data Document
81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
ABPA Undercut Diameter
From 0.937" and 0.943"
ABPC Undercut Width
From 0.046" and 0.049"

Technical Definition

Pin, Grooved, Headless, also referenced with federal logistics item name code 02386 - A headless item of various shapes, usually cylindrical, having either circular or longitudinal groove(s). its length must not exceed 12 inches (304 mm). excludes rod, grooved, headless; shaft (as modified); and pin, vehicular leaf spring shackle.
National Stock Number (NSN) 5315-00-001-4672

Last Modified: 02/14/2017