NSN 420E1L

A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes:laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. For items manufactured from lubricated plastics, see bearing, washer, thrust. For items manufactured from lubricated felt, see felt, mechanical, preformed. Excludes:disk, valve; insulator washer; and shim. See also spacer, plate and spacer, sleeve.

+0.05 to 2000.00 actuation point pounds per square inch contact adjustment range, actuation point adjustable contact adjustability, increase contact action stimulus, unable to decode contact load current rating, 3.625 inches nominal body diameter.

NSN 5930-00-879-3935 Datasheet

(NSN) National Stock Number

5930-00-879-3935

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-879-3935

Requires Demilitarization

Yes

(INC) Item Name Code

00206

Date

Mon, Jan 1, 1962

Schedule B Code

8536509065

Body Diameter

3.625 inches nominal

Contact Action Stimulus

increase

Contact Adjustability

actuation point adjustable

Contact Adjustment Range

+0.05 to 2000.00 actuation point pounds per square inch

Contact Load Current Rating

unable to decode

Contact Stimulus Rating

0.10 differential point nominal pound

Contact Voltage Rating In Volts

unable to decode

Mounting Method

bracket(s)

Nominal Thread Size

unable to decode

Nonpile-Up Contact Arrangement

1 pole, double throw, one position momentary

Overall Height

3.000 inches nominal

Overall Length

4.125 inches nominal

Pressure Connector Type

unable to decode

Pressure Switch Type

gage

Terminal Type

wire lead

Thread Quantity Per Inch

unable to decode

Thread Series Designator

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000206

Cross Reference

CAGE Codes

89326

Barksdale, Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9065

Description

switches, for a voltage not exceeding 1000 volts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-879-3935?

   The FSCG of the NSN 5930-00-879-3935 is 5930

2. Does the NSN 5930-00-879-3935 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509065

3. Does NSN 5930-00-879-3935 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-879-3935 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-879-3935 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-879-3935 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962