NSN 424669-1

A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: for the letter h, both flanges of the h section are equal or longer than the width measured along the axis of the web; for the letter i, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters t and z, on nonferrous type, the web is usually at right angles to the flanges. Letter h section may have a maximum of 5 percent slope on the inside face of the flanges.

3.500 inches nominal aperture width, 4.062 inches nominal center to center distance between bolt holes along width, 3.188 inches nominal center to center distance between bolt holes along length, 9.000 inches nominal aperture length, 8 bolt hole quantity.

NSN 5330-01-151-1052 Datasheet

(NSN) National Stock Number

5330-01-151-1052

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

01-151-1052

Requires Demilitarization

Yes

(INC) Item Name Code

04522

Date

Wed, Apr 13, 1983

Schedule B Code

4016930000

Aperture Length

9.000 inches nominal

Aperture Width

3.500 inches nominal

Bolt Hole Quantity

8

Center To Center Distance Between Bolt Holes Along Length

3.188 inches nominal

Center To Center Distance Between Bolt Holes Along Width

4.062 inches nominal

Cross-Sectional Shape Style

solid single or composition

Cross-Sectional Thickness

0.062 inches nominal

Hardness Rating

Hole Diameter

0.375 inches nominal

Material Document And Classification

unable to decode

Material

unable to decode

Outside Corner Radius

0.250 inches nominal

Outside Edge To Bolt Hole Center Distance Along Length

0.344 inches nominal

Outside Edge To Bolt Hole Center Distance Along Width

0.344 inches nominal

Overall Length

10.250 inches nominal

Overall Width

4.750 inches nominal

Style Designator

non-circular

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0004522

Cross Reference

CAGE Codes

80020

Naval Air Warfare Center Aircraft Division Joint Base Jbmdl

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

95100

Water Commodity

596 - Gaskets, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

194120

Schedule B & Trade

Schedule B

4016-93-0000

Description

gaskets, washers and other seals, of vulcanized rubber other than hard rubber

End Use

12750 - Industrial rubber products

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

62999

(NAICS) North American Industrial Classification System

339991

Questions & Answers

1. What is the FSCG of the NSN 5330-01-151-1052?

   The FSCG of the NSN 5330-01-151-1052 is 5330

2. Does the NSN 5330-01-151-1052 have a Schedule B code assigned?

   Yes, the Schedule B code is 4016930000

3. Does NSN 5330-01-151-1052 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5330-01-151-1052 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5330-01-151-1052 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5330-01-151-1052 was assigned to the Federal Catalog?

   It was assigned 43 years ago, on Wed, Apr 13, 1983