NSN 4255

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

steel material, 5.187 inches nominal length across arms, mtg provision-lock ring groove;brgs-incl.;brg qty 4;brg od 1.312 in.;brg lg 1.109 in.;lubrication mode-port;brg shape-cylinderical,inclosed end;brg type-needle;rh thd;1/4-28 nf,thd size;fitting type accommodated-45 deg elbow or straight;lubrication location-od between arms;port thd provision-thded;2 of the brgs are high wing type,drilled thru for mtg bolts special features.

NSN 2520-01-040-8328 Datasheet

(NSN) National Stock Number

2520-01-040-8328

(FSG) Federal Supply Group

25 - Vehicular Equipment Components

(FSC) Federal Supply Classification

2520 - Vehicular Power Transmission Components

(NIIN) National Item Identification Number

01-040-8328

Requires Demilitarization

Yes

(INC) Item Name Code

53465

Date

Mon, May 16, 1977

Schedule B Code

8483909500

Length Across Arms

5.187 inches nominal

Material

steel

Special Features

mtg provision-lock ring groove;brgs-incl.;brg qty 4;brg od 1.312 in.;brg lg 1.109 in.;lubrication mode-port;brg shape-cylinderical,inclosed end;brg type-needle;rh thd;1/4-28 nf,thd size;fitting type accommodated-45 deg elbow or straight;lubrication location-od between arms;port thd provision-thded;2 of the brgs are high wing type,drilled thru for mtg bolts

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0053465

Cross Reference

CAGE Codes

09605

Bomag Usa Sub of United Dominion Industries Ltd

U.s./canadian manufacturers

1CV05

The Stanley Works Dba Stanley Proto

U.s./canadian manufacturers

66037

Southern Ambulance Builders Co Inc Dba Sabc Inc

U.s./canadian manufacturers

81601

Norfolk Naval Shipyard

U.s./canadian manufacturers

83529

Lovejoy, Llc Div Lovejoy

U.s./canadian manufacturers

86090

Eaton Corporation Dba Airframe Div Fuel & Motion Control Systems

U.s./canadian manufacturers

89875

Defense Logistics Agency Directorate of Medical Materiel Defense Supply Center Philadelphia

U.s./canadian manufacturers

93389

Stanley-Proto Industrial Works Div of the Stanley Works

U.s./canadian manufacturers

95019

Dana Corp Spicer Transmission Div

U.s./canadian manufacturers

K7599

Jc Bamford Excavators Ltd

Non-us manufacturer (nato), other foreign organization or codification bureaus

K4365

Manitowoc Crane Group (uk) Limited

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

64100

Water Commodity

586 - Vehicle parts, other than automobile

National Motor Freight Classification Item Number

123800

Schedule B & Trade

Schedule B

8483-90-9500

Description

parts, nesoi, of bearing housings & plain shaft bearings, housed bearings, clutches, universal joints, flywheels and transmission shafts

End Use

21180 - Industrial machines, other

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

74890

(NAICS) North American Industrial Classification System

333613

Questions & Answers

1. What is the FSCG of the NSN 2520-01-040-8328?

   The FSCG of the NSN 2520-01-040-8328 is 2520

2. Does the NSN 2520-01-040-8328 have a Schedule B code assigned?

   Yes, the Schedule B code is 8483909500

3. Does NSN 2520-01-040-8328 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 2520-01-040-8328 contain precious materials?

   Precious metal content is unknown

5. Does NSN 2520-01-040-8328 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 2520-01-040-8328 was assigned to the Federal Catalog?

   It was assigned 49 years ago, on Mon, May 16, 1977