NSN 441-0765-001

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

0.115 inches maximum body diameter, solid anode type, tantalum capacitive electrode material, w/o mtg facilities, axial terminals body style, 0.403 inches maximum body length.

NSN 5910-01-012-1237 Datasheet

(NSN) National Stock Number

5910-01-012-1237

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-012-1237

Requires Demilitarization

Yes

(INC) Item Name Code

00008

Date

Wed, Nov 5, 1975

Schedule B Code

8532290040

Anode Type

solid

Body Diameter

0.115 inches maximum

Body Length

0.403 inches maximum

Body Style

w/o mtg facilities, axial terminals

Capacitive Electrode Material

tantalum

Capacitance Value Per Section

6.800 microfarads single section

Dc Leakage At Maximum Operating Temp

6.0 microamperes

Dc Leakage At Reference Temp

2.000 microamperes

Dissipation Factor At Reference Temp In Percent

14.0000

Electrical Polarization

polarized

Impedance At Minimum Operating Temp In Ohms

480.0

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

50.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

electrode(s) grounded to case, w/gnd terminal

Terminal Diameter

0.020 inches nominal

Terminal Length

2.000 inches nominal

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-15.00 to 20.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000008

Cross Reference

CAGE Codes

56699

Bc Components

U.s./canadian manufacturers

90201

Mallory Sonalert Products, Inc.

U.s./canadian manufacturers

01002

General Electric Co Capacitors Div

U.s./canadian manufacturers

25228

Siemens Communication Systems Inc

U.s./canadian manufacturers

37942

Yosemite Investment Inc Dba North American Capacitor Co

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-012-1237?

   The FSCG of the NSN 5910-01-012-1237 is 5910

2. Does the NSN 5910-01-012-1237 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-012-1237 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-012-1237 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-01-012-1237 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-012-1237 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Wed, Nov 5, 1975