NSN 441153C2

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

2530-00-848-5514, wheel.

NSN 2530-00-848-5514 Datasheet

(NSN) National Stock Number

2530-00-848-5514

(FSG) Federal Supply Group

25 - Vehicular Equipment Components

(FSC) Federal Supply Classification

2530 - Vehicular Brake, Steering, Axle, Wheel and Track Components

(NIIN) National Item Identification Number

00-848-5514

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Fri, Dec 30, 1966

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9C - Defense supply center columbus, ohio 43215

Pseudo Item Name Code

1666846

Cross Reference

CAGE Codes

29510

Komatsu American Intl Co

U.s./canadian manufacturers

0SAT8

Komatsu America Corp.

Non-manufacturers

27767

Kelsey-Hayes Co

U.s./canadian manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 2530-00-848-5514?

   The FSCG of the NSN 2530-00-848-5514 is 2530

2. Does NSN 2530-00-848-5514 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 2530-00-848-5514 contain precious materials?

   Precious metal content is unknown

4. Does NSN 2530-00-848-5514 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 2530-00-848-5514 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Fri, Dec 30, 1966