NSN 442008

A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. For an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. Excludes:printed circuit board

1.250 inches nominal accommodated fuse length, 0.625 inches minimum and 0.635 inches maximum bushing hole diameter, bushing mounted type body style, 0.625 inches nominal bushing diameter, 0.281 inches nominal accommodated ferrule diameter.

NSN 5920-00-087-6332 Datasheet

(NSN) National Stock Number

5920-00-087-6332

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5920 - Fuses, Arrestors, Absorbers and Protectors

(NIIN) National Item Identification Number

00-087-6332

Requires Demilitarization

Yes

(INC) Item Name Code

28909

Date

Tue, May 2, 1967

Schedule B Code

8548900100

Accommodated Ferrule Diameter

0.281 inches nominal

Accommodated Fuse Length

1.250 inches nominal

Body Style

bushing mounted type

Bushing Diameter

0.625 inches nominal

Bushing Hole Diameter

0.625 inches minimum and 0.635 inches maximum

Bushing Thread Length

0.420 inches minimum and 0.460 inches maximum

Current Carrying Rating In Amps

15.0

Environmental Protection

watertight

Flatted Side Bushing Hole Length

0.570 inches minimum and 0.575 inches maximum

Fuse Accommodation Quantity

1

Fuse Terminal Type Accommodated

ferrule

Length From Front Protrusion To Mounting Surface

0.810 inches nominal

Material Document And Classification

mil-m-14, type sdg mil spec single material response and mil-m-19833, type gdi-30f mil spec single material response body

Material

plastic polyhexamethylene adipamide and glass or plastic polycaprolactam and glass or plastic polyhexamethylene sebacamide and glass and plastic diallyl phthalate and glass body

Mounting Hole Quantity

1

Mounting Hole Style

bushing mounting

Overall Diameter

0.932 inches minimum and 0.942 inches maximum

Overall Height

0.937 inches nominal

Overall Length

2.140 inches minimum and 2.180 inches maximum

Precious Material And Location

contact surfaces silver

Precious Material

silver

Specification/Standard Data

81349-mil-f-19207/10 government specification

Surface Treatment Document And Classification

qq-s-365 fed spec single treatment response contact

Surface Treatment

silver contact

Surface Treatment

solder and tin terminal

Terminal Type And Quantity

2 tab, solder lug

Test Data Document

"81349-mil-f-19207 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Voltage In Volts

250.0

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0028909

Cross Reference

CAGE Codes

80249

Bae Systems Information and Electronic Systems Integration Inc.

U.s./canadian manufacturers

D3841

Wickmann Werke Gmbh

Non-us manufacturer (nato), other foreign organization or codification bureaus

DN837

Littelfuse Europe Gmbh

Non-us manufacturer (nato), other foreign organization or codification bureaus

D0894

Rohde & Schwarz Gmbh & Co. Kommanditgesellschaft Dba R & S

Non-us manufacturer (nato), other foreign organization or codification bureaus

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34570

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061680

Questions & Answers

1. What is the FSCG of the NSN 5920-00-087-6332?

   The FSCG of the NSN 5920-00-087-6332 is 5920

2. Does the NSN 5920-00-087-6332 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5920-00-087-6332 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5920-00-087-6332 contain precious materials?

   Item contains silver.

5. Does NSN 5920-00-087-6332 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5920-00-087-6332 was assigned to the Federal Catalog?

   It was assigned 59 years ago, on Tue, May 2, 1967