NSN 4426-4

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

unable to decode inductance rating, 0.240 inches minimum and 0.260 inches maximum body length, unable to decode coil form type, unable to decode dc resistance rating in ohms, unable to decode core construction.

NSN 5950-01-279-4863 Datasheet

(NSN) National Stock Number

5950-01-279-4863

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

01-279-4863

Requires Demilitarization

Yes

(INC) Item Name Code

06338

Date

Fri, May 20, 1988

Schedule B Code

8504500000

Body Length

0.240 inches minimum and 0.260 inches maximum

Coil Form Type

unable to decode

Core Construction

unable to decode

Dc Resistance Rating In Ohms

unable to decode

Inductance Rating

unable to decode

Inclosure Type

fully inclosed

Maximum Operating Temp

125.0 celsius

Mounting Method

unable to decode

Overall Diameter

0.085 inches minimum and 0.105 inches maximum

Quality Factor

unable to decode

Rating Method

unable to decode

Reliability Failure Rate Level In Percent

0.010

Reliability Indicator

established

Specification/Standard Data

81349-mil-c-39010/8 government specification

Terminal Type And Quantity

2 wire lead

Test Data Document

"81349-mil-c-39010 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Winding Operating Current

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0006338

Cross Reference

CAGE Codes

51190

Viavi Solutionsllc

U.s./canadian manufacturers

13499

Rockwell Collins, Inc. Dba Collins Aerospace Government Systems Div Collins Aerospace - Government Systems

U.s./canadian manufacturers

59474

Jeffers Electronics Inc

U.s./canadian manufacturers

99899

Narda Holdings, Inc. Dba Narda-Miteq Div Narda-Miteq

U.s./canadian manufacturers

23302

S. W. Electronics & Manufacturing Corp. Dba Swemco

U.s./canadian manufacturers

49671

Lockheed Martin Corporation Dba Lockheed Martin Div Lockheed Martin

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34700

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

061980

Schedule B & Trade

Schedule B

8504-50-0000

Description

inductors, nesoi

End Use

20000 - Generators, accessories

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77125

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5950-01-279-4863?

   The FSCG of the NSN 5950-01-279-4863 is 5950

2. Does the NSN 5950-01-279-4863 have a Schedule B code assigned?

   Yes, the Schedule B code is 8504500000

3. Does NSN 5950-01-279-4863 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-01-279-4863 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5950-01-279-4863 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-01-279-4863 was assigned to the Federal Catalog?

   It was assigned 38 years ago, on Fri, May 20, 1988