NSN 45F821

A device which allows radio frequency energy to pass in one direction with very little power loss, but blocks the flow of energy in the other direction by means of multiple wave-polarization or an integral dissipative load. It isolates frequency sensitive circuity from the effects of reflected radio frequency energy resulting from component mismatch. It usually has one or more ports terminated with coaxial connector(s) and/or waveguide flange(s); or other electrical terminations. Isolators designed for internal use in waveguide runs may consist of rods, rings, chips, strips and the like and have no ports or terminations. See also diplexer; duplexer. Excludes:circulator, radio frequency.

w/o mtg facilities, terminal(s) on one surface body style, 1.310 inches nominal body width, 2.500 microfarads single section capacitance value per section, 2.120 inches nominal body height, 2.160 inches nominal body length.

NSN 5910-01-231-5836 Datasheet

(NSN) National Stock Number

5910-01-231-5836

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-231-5836

Requires Demilitarization

Yes

(INC) Item Name Code

00003

Date

Wed, Apr 30, 1986

Schedule B Code

8532250080

Body Height

2.120 inches nominal

Body Length

2.160 inches nominal

Body Style

w/o mtg facilities, terminal(s) on one surface

Body Width

1.310 inches nominal

Capacitance Value Per Section

2.500 microfarads single section

Center To Center Distance Between Terminals Parallel To Length

0.810 inches nominal

Dissipation Factor At Reference Temp In Percent

0.600

Internal Electrical Connection Type

inserted tab

Nonderated Operating Temp

-55.0 celsius minimum and 90.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

440.0 ac-rms single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Length

0.500 inches maximum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 quick disconnect, male, four blade

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000003

Cross Reference

CAGE Codes

09214

General Electric Co Semi-Conductor Products Dept Power Components Opn

U.s./canadian manufacturers

66097

Ronken Industries, Inc. Div Ronken Industries Inc

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-231-5836?

   The FSCG of the NSN 5910-01-231-5836 is 5910

2. Does the NSN 5910-01-231-5836 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-01-231-5836 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-231-5836 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-01-231-5836 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-231-5836 was assigned to the Federal Catalog?

   It was assigned 40 years ago, on Wed, Apr 30, 1986