NSN 495-260

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

3.375 inches nominal center to center distance between mounting facilities parallel to width, 3.375 inches nominal center to center distance between mounting facilities parallel to length, 2 threaded stud circuit attachment method and quantity, white single indicator single range background color, unable to decode accuracy in percent.

NSN 6625-01-141-8475 Datasheet

(NSN) National Stock Number

6625-01-141-8475

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

01-141-8475

Requires Demilitarization

Yes

(INC) Item Name Code

16454

Date

Sun, Nov 7, 1982

Schedule B Code

9030908030

Accuracy In Percent

unable to decode

Background Color

white single indicator single range

Center To Center Distance Between Mounting Facilities Parallel To Width

3.375 inches nominal

Center To Center Distance Between Mounting Facilities Parallel To Length

3.375 inches nominal

Circuit Attachment Method And Quantity

2 threaded stud

Circuit Current For Which Designed

ac

Dial Scale Marking Color

unable to decode

Environmental Protection

shock resistant and watertight

Features Provided

zero adjuster

Fsc Application Data

test set,elect. equip.

Furnished Items And Quantity

nut 8; lockwasher 2; flat washer 10

Indicator Type

dial w/pointer

Installation Design

panel

Material

aluminum and steel

Meter Body Diameter Behind Mounting Flange

3.930 inches nominal

Meter Depth Behind Mounting Flange

2.816 inches nominal

Mounting Arrangement Style

four hole/stud rectangular/square

Mounting Facility Type And Quantity

4 screw and 4 unthreaded hole(s)

Mounting Hole Diameter

0.312 inches nominal

Movement Suspension Method

jewel pivot base

Movement Type

moving coil, permanent magnet

Nuclear Hardness Critical Feature

nonhardened

Overall Height

4.421 inches nominal

Overall Length

4.093 inches nominal

Overall Width

4.421 inches nominal

Pointer Color

unable to decode

Power Source

external

Scale Selection Method

terminal

Style Designator

rectangular flush mtg

Surface Treatment

paint

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0016454

Cross Reference

CAGE Codes

04801

L3harris Maritime Power & Energy Solutions, Inc

U.s./canadian manufacturers

15309

Jewell Instruments, Llc Dba Modutec Use Cage Code 33005 for Cataloging

U.s./canadian manufacturers

33005

Jewell Instruments Llc

U.s./canadian manufacturers

0BZM1

Mkc Electronics Inc Dba Mk Electronics Div Mkc Electronics Inc, Dba Mk Electronics

Non-manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

J - 100.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34540

Water Commodity

657 - Instruments, electric meter

National Motor Freight Classification Item Number

061620

Schedule B & Trade

Schedule B

9030-90-8030

Description

parts and accessories of articles of schedule b subheading 9030.39

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87479

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 6625-01-141-8475?

   The FSCG of the NSN 6625-01-141-8475 is 6625

2. Does the NSN 6625-01-141-8475 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030908030

3. Does NSN 6625-01-141-8475 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6625-01-141-8475 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6625-01-141-8475 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6625-01-141-8475 was assigned to the Federal Catalog?

   It was assigned 43 years ago, on Sun, Nov 7, 1982