NSN 498F

A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.

knob marked w/white arrow knob special markings, 1b first switch single section in-line pile-up contact form arrangement, 1 individual section quantity, 1c second switch single section in-line pile-up contact form arrangement, 0.875 inches nominal single mounting facility longest horizontal distance between mounting centers.

NSN 5930-00-242-1002 Datasheet

(NSN) National Stock Number

5930-00-242-1002

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-242-1002

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Tue, Jan 1, 1963

Individual Section Quantity

1

Knob Special Markings

knob marked w/white arrow

Longest Horizontal Distance Between Mounting Centers

0.875 inches nominal single mounting facility

Pile-Up Contact Form Arrangement

1b first switch single section in-line

Pile-Up Contact Form Arrangement

1c second switch single section in-line

Mounting Facility Pattern

two position in-line single mounting facility

Mounting Method

flange single mounting facility

Switch Actuator Indexing Position Quantity

2 single actuator

Switch Actuator Positioning Increment

90.0 degrees single actuator

Switch Contact Basic Design

pile-up

Terminal Type

tab, solder lug

Unthreaded Mounting Hole Diameter

0.141 inches nominal single mounting facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

3B4M0

Lucent Technologies Inc Corporate Headquarters

Non-manufacturers

64959

American Telephone and Telegraph Co

U.s./canadian manufacturers

70408

At and T Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Questions & Answers

1. What is the FSCG of the NSN 5930-00-242-1002?

   The FSCG of the NSN 5930-00-242-1002 is 5930

2. Does NSN 5930-00-242-1002 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5930-00-242-1002 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5930-00-242-1002 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5930-00-242-1002 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963