NSN 4B26452

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

not included insignia, not included enameled feature, mil-s-6050 mil spec 1st material response or mil-s-6759 mil spec 2nd material response body material document and classification, mil-s-5059 mil spec single material response roller material document and classification, mil-s-18728 mil spec single material response cam material document and classification.

NSN 5340-00-994-3722 Datasheet

(NSN) National Stock Number

5340-00-994-3722

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-994-3722

Requires Demilitarization

Yes

(INC) Item Name Code

17223

Date

Mon, Jan 1, 1962

Schedule B Code

8308906000

Enameled Feature

not included

Insignia

not included

Material Document And Classification

mil-s-18728 mil spec single material response cam

Material Document And Classification

mil-s-6050 mil spec 1st material response or mil-s-6759 mil spec 2nd material response body

Material Document And Classification

mil-s-5059 mil spec single material response roller

Material Document And Classification

mil-s-7720 mil spec single material response pin

Material

steel corrosion resisting pin

Material

steel corrosion resisting roller

Material

steel comp 8630 or steel body

Material

steel comp 8630 cam

Overall Length

2.438 inches nominal

Specific Usage Design

safety belt

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0017223

Cross Reference

CAGE Codes

80049

Department of the Air Force

U.s./canadian manufacturers

97151

Air Force Lifecycle Management Center Electronic Components (aflcmc/ezss)

Government departments or units, including military organizations

98752

Warner Robins Air Logistics Center

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

48840

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

094570

Schedule B & Trade

Schedule B

8308-90-6000

Description

buckles and buckle clasps, and parts thereof, of base metal

End Use

12640 - Finished textile supplies

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69933

(NAICS) North American Industrial Classification System

339993

Questions & Answers

1. What is the FSCG of the NSN 5340-00-994-3722?

   The FSCG of the NSN 5340-00-994-3722 is 5340

2. Does the NSN 5340-00-994-3722 have a Schedule B code assigned?

   Yes, the Schedule B code is 8308906000

3. Does NSN 5340-00-994-3722 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-00-994-3722 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5340-00-994-3722 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-00-994-3722 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962