NSN 4L13025

A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. For an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. Excludes:printed circuit board

0.330 inches nominal body height, 1.120 inches nominal body width, 1.250 inches nominal body length, 240.000 picofarads single section capacitance value per section, w/mtg hole(s)/slot(s), terminals on opposite surfaces body style.

NSN 5910-00-807-2598 Datasheet

(NSN) National Stock Number

5910-00-807-2598

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-807-2598

Requires Demilitarization

Yes

(INC) Item Name Code

00005

Date

Mon, Jan 1, 1962

Schedule B Code

8532290020

Body Height

0.330 inches nominal

Body Length

1.250 inches nominal

Body Style

w/mtg hole(s)/slot(s), terminals on opposite surfaces

Body Width

1.120 inches nominal

Capacitance Value Per Section

240.000 picofarads single section

Center To Center Distance Between Terminals Parallel To Length

1.750 inches nominal

Dissipation Factor At Reference Temp In Percent

0.00075

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

1.312 inches nominal

Insulation Resistance At Maximum Operating Temp

1500.0 megohms

Insulation Resistance At Reference Temp

10000.0 megohms

Material

plastic case

Mounting Facility Type And Quantity

2 unthreaded mounting holes

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

2500.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Specification/Standard Data

81349-mil-r-5/7 government specification

Terminal Length

0.470 inches nominal

Terminal Type And Quantity

2 tab, solder lug

Test Data Document

"81349-mil-c-5 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-2.00 to 2.00 percent single section

Unthreaded Mounting Hole Diameter

0.144 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000005

Cross Reference

CAGE Codes

14655

Cornell-Dubilier Electronics

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

00853

Cornell-Dubilier Marketing Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0020

Description

fixed capacitors, mica dielectric, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-807-2598?

   The FSCG of the NSN 5910-00-807-2598 is 5910

2. Does the NSN 5910-00-807-2598 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290020

3. Does NSN 5910-00-807-2598 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-807-2598 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-807-2598 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-807-2598 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962