NSN 4M45E2-2S2

A maintenance kit for components of airplanes, helicopters, and the like.

200.0 milliamperes resistive load dc at altitude contact load current rating, unable to decode250.0 milliamperes resistive load and 100.0 milliamperes inductive load dc at sea level contact load current rating, unable to decode contact load current rating, 75.0 milliamperes resistive load ac at sea levelunable to decode contact load current rating, contact load current rating.

NSN 5930-01-135-2637 Datasheet

(NSN) National Stock Number

5930-01-135-2637

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-135-2637

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Tue, Jul 20, 1982

Schedule B Code

8536509020

Contact Load Current Rating

75.0 milliamperes resistive load ac at sea levelunable to decode

Contact Load Current Rating

unable to decode250.0 milliamperes resistive load and 100.0 milliamperes inductive load dc at sea level

Contact Load Current Rating

unable to decode

Contact Load Current Rating

Contact Load Current Rating

200.0 milliamperes resistive load dc at altitude

Contact Switching Action

makes before breaks each section rear

Contact Voltage Rating In Volts

115.0 ac at altitude

Contact Voltage Rating In Volts

115.0 ac at sea level

Contact Voltage Rating In Volts

18.0 dc at altitude

Contact Voltage Rating In Volts

28.0 dc at sea level

First Flat Length

0.250 inches nominal single actuator

Flat Height

0.216 inches nominal single actuator

Individual Section Quantity

2

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Type

slotted bushing at 3:00 oclock

Overall Diameter

0.985 inches minimum and 1.180 inches maximum

Overall Length

2.246 inches nominal

Pole Quantity

2 each section front

Rotor Through Connection Quantity

2 each section

Shaft Diameter

0.248 inches minimum and 0.251 inches maximum single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.437 inches nominal single actuator

Style Designator

circular wafer, bushing mount

Switch Actuator Indexing Position Quantity

2 single actuator

Switch Actuator Positioning Increment

45.0 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Actuator Stop Device Type

unable to decode

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Test Data Document

"81349-mils3786 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Length

0.437 inches nominal single mounting facility

Thread Series Designator

unf single mounting facility

Throw Quantity

2 each section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

91812

Janco Corporation Dba Janco Corp Div Mason Controls

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-135-2637?

   The FSCG of the NSN 5930-01-135-2637 is 5930

2. Does the NSN 5930-01-135-2637 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-01-135-2637 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-135-2637 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-01-135-2637 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-135-2637 was assigned to the Federal Catalog?

   It was assigned 44 years ago, on Tue, Jul 20, 1982