NSN 4MC4-2-30

A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.

0.750 inches nominal body width, at pole one actuator position designation, single pole type body style, 2.300 inches maximum body length, trip-reset actuator function.

NSN 5925-01-192-8890 Datasheet

(NSN) National Stock Number

5925-01-192-8890

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-192-8890

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Fri, Oct 26, 1984

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at pole one

Body Length

2.300 inches maximum

Body Style

single pole type

Body Width

0.750 inches nominal

Boss Height

0.115 inches nominal

Center To Center Distance Between Terminals Parallel To Length

1.810 inches nominal

Circuit Protection Type

overcurrent single location

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

1.810 inches nominal

Internal Trip Release Configuration

series trip single location

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 toggle

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

30.0 amperes dc single location

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

1500.0 dc single location

Mounting Facility Type And Quantity

2 threaded hole(s)

Mounting Surface To Terminal End Distance

2.510 inches nominal

Nominal Thread Size

0.138 inches

Operating Voltage Type And Rating Per Pole In Volts

60.0 dc single location

Pole Quantity

1

Reset Method

manual

Terminal Type And Quantity

2 threaded stud

Thread Quantity Per Inch

32

Thread Series Designator

unified national coarse (unc)

Trip Release Characteristic

time delay single location

Trip Release Method

magnetic single location

Trip Delay Time In Seconds Per Rated Continuous Current

0.700 minimum at 200 pct and 1.800 maximum at 200 pct single location

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

125.0 single location

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

82647

Sensata Technologies, Inc. Div Sensata Attleboro

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-192-8890?

   The FSCG of the NSN 5925-01-192-8890 is 5925

2. Does the NSN 5925-01-192-8890 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-192-8890 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-192-8890 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-01-192-8890 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-192-8890 was assigned to the Federal Catalog?

   It was assigned 41 years ago, on Fri, Oct 26, 1984