NSN 5-348-01

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

unable to decode inductance rating, 1.500 inches nominal body width, unable to decode distance between mounting facility centers, 1.500 inches nominal body height, 2.000 inches nominal body length.

NSN 5950-00-175-8722 Datasheet

(NSN) National Stock Number

5950-00-175-8722

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-175-8722

Requires Demilitarization

Yes

(INC) Item Name Code

00724

Date

Fri, Dec 10, 1971

Schedule B Code

8504900020

Body Height

1.500 inches nominal

Body Length

2.000 inches nominal

Body Width

1.500 inches nominal

Distance Between Mounting Facility Centers

unable to decode

Inductance Rating

unable to decode

Inductance Type

fixed

Inclosure Type

open

Mounting Facility Quantity

unable to decode

Mounting Hole Diameter

unable to decode

Mounting Method

Rating Method

unable to decode

Reliability Indicator

not established

Terminal Type And Quantity

2 wire lead

Winding Operating Current

unable to decode

Winding Quantity

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000724

Cross Reference

CAGE Codes

06383

Panduit Corp.

U.s./canadian manufacturers

08748

Eldec Aerospace Corp

U.s./canadian manufacturers

74364

Eastman Chemical Company

U.s./canadian manufacturers

83330

Dialight Corporation

U.s./canadian manufacturers

91967

Halsit Holdings Llc Div Halsit Holdings, Llc Dba Abbatron

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34420

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063498

Schedule B & Trade

Schedule B

8504-90-0020

Description

transformer parts

End Use

20000 - Generators, accessories

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77129

(NAICS) North American Industrial Classification System

335311

Questions & Answers

1. What is the FSCG of the NSN 5950-00-175-8722?

   The FSCG of the NSN 5950-00-175-8722 is 5950

2. Does the NSN 5950-00-175-8722 have a Schedule B code assigned?

   Yes, the Schedule B code is 8504900020

3. Does NSN 5950-00-175-8722 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-00-175-8722 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5950-00-175-8722 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-00-175-8722 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Fri, Dec 10, 1971