NATO Stock Number
5905-00-733-1340
Sold in multiples of
DEMIL
NO
Section Quantity
1
Body Style
Rectangular w/mounting holes
Reliability Indicator
Not established
Terminal Length
0.188 inches
Shaft Diameter
0.093 inches
Shaft Length
0.080 inches
Body Length
0.375 inches
Body Width
0.235 inches
Body Height
0.375 inches
Shaft Style
Round, slotted
Actuator Type
Single shaft
Effective Electrical Rotation In Deg Angular Rotation
Between 6480.0 and 10080.0
Maximum Starting Torque
5.00 inch-ounces
Maximum Running Torque
5.00 inch-ounces
Center To Center Distance Between Terminals
0.200 inches
Lateral Distance Between Mounting Hole Centers
0.375 inches
Terminal Location
Left adjacent side two rows
Mounting Method
Terminal
Center To Center Distance Between Terminal Rows
0.100 inches
Features Provided
Humidity proof
Cubic Measure
0.027 cubic inches
Electrical Resistance Per Section
100.0 ohms c and better flooring
Electrical Resistance Per Section
100.0 ohms single section
Rotary Actuator Travel In Angular Deg
Between 6480.0 and 10080.0
Center To Center Distance Between Center Terminal And Outside Terminal
0.100 inches
Center To Center Distance Between Center Terminal And Outside Terminal
0.100 inches
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
150.0 single section
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-50.0/+50.0 single section
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-50.0 to 50.0 single section
Power Dissipation Rating Per Section In Watts
1.0 7th secondary quality
Power Dissipation Rating Per Section In Watts
1.0 free air single section
Resistance Tolerance Per Section In Percent
-5.0/+5.0 single section
Resistance Tolerance Per Section In Percent
-5.0 to 5.0 single section
Actuator Travel Control Feature
Clutch
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
50.0 single section
Standard Taper Curve Per Section
A single section
Test Data Document
94117-220023 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity
3 pin