NSN 50-6885-53

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

1560-01-614-2166, nacell support assy.

NSN 1560-01-614-2166 Datasheet

(NSN) National Stock Number

1560-01-614-2166

(FSG) Federal Supply Group

15 - Aerospace Craft and Structural Components

(FSC) Federal Supply Classification

1560 - Airframe Structural Components

(NIIN) National Item Identification Number

01-614-2166

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Thu, Nov 29, 2012

Schedule B Code

8803300060

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1587663

Cross Reference

CAGE Codes

81205

The Boeing Company Div Defense

U.s./canadian manufacturers

Freight Information

Questions & Answers

1. What is the FSCG of the NSN 1560-01-614-2166?

   The FSCG of the NSN 1560-01-614-2166 is 1560

2. Does the NSN 1560-01-614-2166 have a Schedule B code assigned?

   Yes, the Schedule B code is 8803300060

3. Does NSN 1560-01-614-2166 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 1560-01-614-2166 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 1560-01-614-2166 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 1560-01-614-2166 was assigned to the Federal Catalog?

   It was assigned 13 years ago, on Thu, Nov 29, 2012