NSN 5000959

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

5365-00-258-3860, sleeve spacer.

NSN 5365-00-258-3860 Datasheet

(NSN) National Stock Number

5365-00-258-3860

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5365 - Bushings, Rings, Shims and Spacers

(NIIN) National Item Identification Number

00-258-3860

Requires Demilitarization

Yes

(INC) Item Name Code

13207

Date

Wed, Jun 20, 1973

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0013207

Cross Reference

CAGE Codes

0B9R9

Meggitt Aircraft Braking Systems Corporation

U.s./canadian manufacturers

73842

Goodyear Tire and Rubber Co the

U.s./canadian manufacturers

Freight Information

Air Commodity

AZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

T - 55.0

National Motor Freight Class Rating

T - 55.0

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

50675

Water Commodity

572 - Iron or steel bars, (less than 35 feet)(see 822)

National Motor Freight Classification Item Number

106940

Questions & Answers

1. What is the FSCG of the NSN 5365-00-258-3860?

   The FSCG of the NSN 5365-00-258-3860 is 5365

2. Does NSN 5365-00-258-3860 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5365-00-258-3860 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5365-00-258-3860 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 5365-00-258-3860 was assigned to the Federal Catalog?

   It was assigned 53 years ago, on Wed, Jun 20, 1973