NSN 5032462

An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required.

0.060 inches nominal first leg corner radius, 90.0 degrees nominal first leg angle, 0.350 inches nominal first leg distance from edge to hole center along width, 0.169 inches minimum and 0.175 inches maximum first leg hole diameter, two holes first leg hole arrangement style.

NSN 5340-01-333-9986 Datasheet

(NSN) National Stock Number

5340-01-333-9986

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-333-9986

Requires Demilitarization

Yes

(INC) Item Name Code

16900

Date

Thu, Feb 14, 1991

Schedule B Code

8302500000

First Leg Angle

90.0 degrees nominal

First Leg Corner Radius

0.060 inches nominal

First Leg Distance From Edge To Hole Center Along Width

0.350 inches nominal

First Leg Hole Arrangement Style

two holes

First Leg Hole Diameter

0.169 inches minimum and 0.175 inches maximum

First Leg Distance Between Hole Centers Along Length

0.250 inches nominal

First Leg Distance Between Hole Centers Along Width

0.225 inches nominal

First Leg Distance From Edge To Hole Center Along Length

0.240 inches nominal

First Leg Style

corner radius

First Leg Thickness

0.050 inches nominal

First Leg Width

0.800 inches nominal

First Leg Length

0.750 inches nominal

Material Document And Classification

qq-a-250/11,t4 fed spec single material response

Material

aluminum alloy 6061

Mounting Hole Type

plain

Second Leg Corner Radius

0.060 inches nominal

Second Leg Distance Between Hole Centers Along Length

1.250 inches nominal

Second Leg Distance Between Hole Centers Along Width

0.330 inches nominal

Second Leg Hole Diameter

0.127 inches minimum and 0.133 inches maximum

Second Leg Distance From Edge To Hole Center Along Length

0.250 inches nominal

Second Leg Distance From Edge To Hole Center Along Width

0.290 inches nominal

Second Leg Width

0.800 inches nominal

Second Leg Length

3.500 inches nominal

Second Leg Relationship To First Leg

not identical

Second Leg Style

corner radius

Second Leg Thickness

0.050 inches nominal

Special Features

2 holes in turned edge

Style Designator

angle

Surface Treatment Document And Classification

mil-c-5541,cl 1a mil spec single treatment response

Surface Treatment

chromate

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0016900

Cross Reference

CAGE Codes

82577

Raytheon Company Dba Raytheon

Non-manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Schedule B & Trade

Schedule B

8302-50-0000

Description

hat-racks, hat pegs, brackets and similar fixtures, and parts thereof, of base metal

End Use

41050 - Cell phones and other household goods, n.e.c.

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69919

(NAICS) North American Industrial Classification System

337215

Questions & Answers

1. What is the FSCG of the NSN 5340-01-333-9986?

   The FSCG of the NSN 5340-01-333-9986 is 5340

2. Does the NSN 5340-01-333-9986 have a Schedule B code assigned?

   Yes, the Schedule B code is 8302500000

3. Does NSN 5340-01-333-9986 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-01-333-9986 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5340-01-333-9986 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-01-333-9986 was assigned to the Federal Catalog?

   It was assigned 35 years ago, on Thu, Feb 14, 1991