NSN 50C577

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

unable to decode adjustment method and quantity, 1.687 inches nominal body length, unable to decode adjustment device drive type, 1.312 inches nominal body width, 3.062 inches nominal body height.

NSN 5950-00-025-3820 Datasheet

(NSN) National Stock Number

5950-00-025-3820

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-025-3820

Requires Demilitarization

Yes

(INC) Item Name Code

00777

Date

Tue, Jan 1, 1963

Schedule B Code

8548900100

Adjustment Device Drive Type

unable to decode

Adjustment Method And Quantity

unable to decode

Body Height

3.062 inches nominal

Body Length

1.687 inches nominal

Body Width

1.312 inches nominal

Distance Between Mounting Facility Centers

unable to decode

Frequency Rating

unable to decode

Inclosure Type

fully inclosed

Mounting Facility Quantity

unable to decode

Mounting Method

unable to decode

Nominal Thread Size

unable to decode

Reliability Indicator

not established

Terminal Type And Quantity

5 tab, solder lug

Thread Quantity Per Inch

unable to decode

Thread Series Designator

unable to decode

Transformer Function

interstage

Winding Function And Quantity

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000777

Cross Reference

CAGE Codes

04377

Morey Corp the

U.s./canadian manufacturers

26916

Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Multiple

U.s./canadian manufacturers

80063

Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-00-025-3820?

   The FSCG of the NSN 5950-00-025-3820 is 5950

2. Does the NSN 5950-00-025-3820 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5950-00-025-3820 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-00-025-3820 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5950-00-025-3820 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-00-025-3820 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963