NSN 511.024

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

cutting unit end item identification, toggle level part name assigned by controlling agency.

NSN 5340-01-655-0991 Datasheet

(NSN) National Stock Number

5340-01-655-0991

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-655-0991

Requires Demilitarization

Yes

(INC) Item Name Code

40268

Date

Wed, May 18, 2016

Schedule B Code

8205700090

End Item Identification

cutting unit

Part Name Assigned By Controlling Agency

toggle level

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0040268

Cross Reference

CAGE Codes

7W680

Kennametal Inc. Div Charlotte Business Office

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

8205-70-0090

Description

clamps and similar handtools, not vises, and parts

End Use

21190 - Photo, service industry machinery

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

69547

(NAICS) North American Industrial Classification System

332216

Questions & Answers

1. What is the FSCG of the NSN 5340-01-655-0991?

   The FSCG of the NSN 5340-01-655-0991 is 5340

2. Does the NSN 5340-01-655-0991 have a Schedule B code assigned?

   Yes, the Schedule B code is 8205700090

3. Does NSN 5340-01-655-0991 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-01-655-0991 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5340-01-655-0991 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-01-655-0991 was assigned to the Federal Catalog?

   It was assigned 10 years ago, on Wed, May 18, 2016