NSN 511143

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

1.781 inches nominal plate length, bar o/a lg:2.500 in.nom;material:steel; special features, 1 strike quantity, surface strike type, 0.312 inches nominal bar diameter.

NSN 5340-01-111-7929 Datasheet

(NSN) National Stock Number

5340-01-111-7929

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-111-7929

Requires Demilitarization

Yes

(INC) Item Name Code

06596

Date

Thu, Apr 23, 1981

Schedule B Code

8301600000

Diameter

0.312 inches nominal bar

Length

1.781 inches nominal plate

Special Features

bar o/a lg:2.500 in.nom;material:steel;

Strike Quantity

1

Strike Type

surface

Surface Treatment

unable to decode

Width

1.438 inches nominal plate

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0006596

Cross Reference

CAGE Codes

14557

Stanley Works the

U.s./canadian manufacturers

22680

U M C Electronics Co

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

48950

Water Commodity

573 - Bolts or nuts (iron or steel),(less than 35 feet)

National Motor Freight Classification Item Number

093486

Schedule B & Trade

Schedule B

8301-60-0000

Description

parts of locks, base metal

End Use

12300 - Finished metal shapes

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69911

(NAICS) North American Industrial Classification System

332510

Questions & Answers

1. What is the FSCG of the NSN 5340-01-111-7929?

   The FSCG of the NSN 5340-01-111-7929 is 5340

2. Does the NSN 5340-01-111-7929 have a Schedule B code assigned?

   Yes, the Schedule B code is 8301600000

3. Does NSN 5340-01-111-7929 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-01-111-7929 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5340-01-111-7929 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-01-111-7929 was assigned to the Federal Catalog?

   It was assigned 45 years ago, on Thu, Apr 23, 1981