NSN 514352

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

qq-a-327,t6 fed spec single material response material document and classification, 0.060 inches minimum and 0.066 inches maximum body thickness, flat cross-sectional shape style, 0.143 inches minimum and 0.148 inches maximum hole diameter, gearbox module,air data computer fsc application data.

NSN 5340-00-935-5035 Datasheet

(NSN) National Stock Number

5340-00-935-5035

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-935-5035

Requires Demilitarization

Yes

(INC) Item Name Code

29785

Date

Fri, May 19, 1972

Schedule B Code

7616995195

Body Thickness

0.060 inches minimum and 0.066 inches maximum

Cross-Sectional Shape Style

flat

Fsc Application Data

gearbox module,air data computer

Hole Diameter

0.143 inches minimum and 0.148 inches maximum

Material Document And Classification

qq-a-327,t6 fed spec single material response

Material

aluminum alloy 6061

Mounting Opening Shape Style

unthreaded hole

Securing Device Type

threaded fastener

Identification

Demilitarization Code

B - Usml items - mutilation to the point of scrap required worldwide. (note 7).

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

FGZ - Ogden air logistics center 5851 f ave hill afb, ut 84056-5713

Pseudo Item Name Code

0029785

Cross Reference

CAGE Codes

64547

Honeywell International, Inc Div Aerospace-Tucson

U.s./canadian manufacturers

70210

Honeywell International Inc. Div Aerospace - Torrance

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

J - 100.0

National Motor Freight Class Rating

J - 100.0

Rail Variation

1

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

05380

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

013120

Schedule B & Trade

Schedule B

7616-99-5195

Description

articles of aluminum nesoi

End Use

12300 - Finished metal shapes

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69979

(NAICS) North American Industrial Classification System

332999

Questions & Answers

1. What is the FSCG of the NSN 5340-00-935-5035?

   The FSCG of the NSN 5340-00-935-5035 is 5340

2. Does the NSN 5340-00-935-5035 have a Schedule B code assigned?

   Yes, the Schedule B code is 7616995195

3. Does NSN 5340-00-935-5035 require demilitarization?

   Usml items - mutilation to the point of scrap required worldwide. (note 7).

4. Does NSN 5340-00-935-5035 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5340-00-935-5035 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-00-935-5035 was assigned to the Federal Catalog?

   It was assigned 54 years ago, on Fri, May 19, 1972