NSN 5153564

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

wall mounted control type, wall mounting type, 7.0 current rating in amps, wall mounting design type, dental x-ray system part name assigned by controlling agency.

NSN 6525-01-601-3931 Datasheet

(NSN) National Stock Number

6525-01-601-3931

(FSG) Federal Supply Group

65 - Medical, Dental, and Veterinary Equipment and Supplies

(FSC) Federal Supply Classification

6525 - Veterinary Dental Imaging Equipment and Supplies: Medical

(NIIN) National Item Identification Number

01-601-3931

Requires Demilitarization

Yes

(INC) Item Name Code

06317

Date

Thu, Jan 19, 2012

Schedule B Code

9022130000

Control Type

wall mounted

Current Rating In Amps

7.0

Design Type

wall mounting

Part Name Assigned By Controlling Agency

dental x-ray system

Mounting Type

wall

Operation Method

manual

Voltage In Volts

240.0

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0006317

Cross Reference

CAGE Codes

4QX22

Carestream Health, Inc

U.s./canadian manufacturers

FAV49

Carestream Health France

Non-manufacturers

Freight Information

Schedule B & Trade

Schedule B

9022-13-0000

Description

apparatus based on the use of x-rays for dental uses, nesoi

End Use

21610 - Medicinal equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77421

(NAICS) North American Industrial Classification System

334517

Questions & Answers

1. What is the FSCG of the NSN 6525-01-601-3931?

   The FSCG of the NSN 6525-01-601-3931 is 6525

2. Does the NSN 6525-01-601-3931 have a Schedule B code assigned?

   Yes, the Schedule B code is 9022130000

3. Does NSN 6525-01-601-3931 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6525-01-601-3931 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6525-01-601-3931 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6525-01-601-3931 was assigned to the Federal Catalog?

   It was assigned 14 years ago, on Thu, Jan 19, 2012