NSN 520I502R

A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, and the like, shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes:resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.

at pole one actuator position designation, 1.531 inches minimum and 1.562 inches maximum body length, trip-reset actuator function, 1 alarm auxiliary switch function and quantity, single pole type body style.

NSN 5925-01-104-0422 Datasheet

(NSN) National Stock Number

5925-01-104-0422

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-104-0422

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Wed, Nov 26, 1980

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at pole one

Auxiliary Switch Function And Quantity

1 alarm

Body Length

1.531 inches minimum and 1.562 inches maximum

Body Style

single pole type

Body Width

0.594 inches minimum and 0.625 inches maximum

Bushing Length

0.332 inches minimum and 0.380 inches maximum

Center To Center Distance Between Terminals Parallel To Length

0.875 inches minimum and 0.906 inches maximum

Fragility Factor

moderately rugged

Inclosure Protection Type For Which Designed

hermetically sealed

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 toggle

Mounting Facility Type And Quantity

1 threaded bushing with panel seal

Mounting Surface To Terminal End Distance

1.669 inches minimum and 1.700 inches maximum

Nominal Thread Size

0.375 inches

Pole Quantity

1

Reset Method

manual

Specification/Standard Data

81349-mil-c-39019/2 government specification

Storage Type

general purpose warehouse

Switch Location And Position Designation

internal at pole one

Switch Terminal Type

tab, solder lug

Switch Voltage Rating And Type In Volts

120.0 ac and 50.0 dc

Switch Contact Arrangement

single pole, double throw

Switch Current Rating And Type In Amps

0.5 ac and 0.5 dc

Terminal Type And Quantity

2 wire hook

Test Data Document

"81349-mil-c-39019 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Thread Quantity Per Inch

32

Thread Series Designator

unef

Unpackaged Unit Weight

50.0 grams nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

81541

Sensata Technologies Maryland, Inc

Non-manufacturers

36090

Lockheed Martin Librascope Corp

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-104-0422?

   The FSCG of the NSN 5925-01-104-0422 is 5925

2. Does the NSN 5925-01-104-0422 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-104-0422 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-104-0422 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-01-104-0422 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-104-0422 was assigned to the Federal Catalog?

   It was assigned 45 years ago, on Wed, Nov 26, 1980