NSN 529901

0.582 inches nominal center section height, 0.250 inches nominal first leg corner radius, 0.045 inches minimum and 0.050 inches maximum center section thickness, machined fabrication method, 2.700 inches nominal center section width.

NSN 5340-00-940-2013 Datasheet

(NSN) National Stock Number

5340-00-940-2013

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-940-2013

Requires Demilitarization

Yes

(INC) Item Name Code

20354

Date

Tue, Nov 16, 1965

Center Section Height

0.582 inches nominal

Center Section Thickness

0.045 inches minimum and 0.050 inches maximum

Center Section Width

2.700 inches nominal

Fabrication Method

machined

First Leg Corner Radius

0.250 inches nominal

First Leg Distance From Edge To Hole Center Along Width

0.250 inches nominal

First Leg Hole Arrangement Style

three holes

First Leg Hole Diameter

0.245 inches minimum and 0.255 inches maximum

First Leg Distance Between First And Second Hole Centers Along Width

1.100 inches nominal

First Leg Distance Between Second And Third Hole Centers Along Width

1.100 inches nominal

First Leg Distance From Edge To Hole Center Along Length

0.250 inches nominal

First Leg Style

corner radius

First Leg Thickness

0.045 inches minimum and 0.050 inches maximum

First Leg Width

2.700 inches nominal

First Leg Length

0.750 inches nominal

Material Document And Classification

ams4910 assn std single material response

Material

titanium alloy

Second Leg Hole Arrangement Style

no hole

Second Leg Width

2.700 inches nominal

Second Leg Length

1.540 inches nominal

Second Leg Relationship To First Leg

not identical

Second Leg Style

square and tapered

Second Leg Thickness

0.045 inches minimum and 0.050 inches maximum

Special Features

first leg raised 2 deg 22 min on left side

Style Designator

double angle

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020354

Cross Reference

CAGE Codes

77445

Rtx Corporation Dba Pratt & Whitney Div Pratt &whitney

Non-manufacturers

Freight Information

Air Commodity

AZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

Q - 70.0

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 5340-00-940-2013?

   The FSCG of the NSN 5340-00-940-2013 is 5340

2. Does NSN 5340-00-940-2013 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-00-940-2013 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5340-00-940-2013 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-00-940-2013 was assigned to the Federal Catalog?

   It was assigned 60 years ago, on Tue, Nov 16, 1965