NSN 5305PL1748673

A transformer which incorporates the primary and secondary functions into a single winding, which is common to both input and output circuits, and is designed to change the relationship of volts and amperes between the entire winding and its taps. Includes multiple winding transformers of like design and items in which a variation of the turns ratio or inductive ratio of inductive coupling is accomplished by connection to fixed terminals. Also, includes items having a provision for mechanically changing the turns ratio in progressive increments, by means of a shaft, voltage taps, ratio adjuster, or devices of similar design. Excludes:transformer (1), power; transformer (1), pulse.

0.924 inches minimum and 0.954 inches maximum fastener length, 0.3110 inches minimum and 0.3120 inches maximum grip diameter, hardness rating, 0.428 inches minimum and 0.448 inches maximum grip length, 99.0 degrees minimum and 101.0 degrees maximum countersink angle.

NSN 5305-01-054-6279 Datasheet

(NSN) National Stock Number

5305-01-054-6279

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5305 - Screws

(NIIN) National Item Identification Number

01-054-6279

Requires Demilitarization

Yes

(INC) Item Name Code

29294

Date

Mon, Jan 23, 1978

Schedule B Code

7318152000

Countersink Angle

99.0 degrees minimum and 101.0 degrees maximum

Fastener Length

0.924 inches minimum and 0.954 inches maximum

Grip Diameter

0.3110 inches minimum and 0.3120 inches maximum

Grip Length

0.428 inches minimum and 0.448 inches maximum

Hardness Rating

Head Diameter

0.429 inches minimum and 0.479 inches maximum

Head Style

flat countersunk

Internal Drive Style

offset cruciform (torque set)

Material Document And Classification

unable to decode

Material

unable to decode

Minimum Tensile Strength

220000 pounds per square inch

Nominal Thread Diameter

0.312 inches

Surface Treatment Document And Classification

unable to decode

Surface Treatment

unable to decode

Thread Class

3a

Thread Direction

right-hand

Thread Length

0.476 inches minimum and 0.526 inches maximum

Thread Quantity Per Inch

24

Thread Series Designator

unified national joint fine (unjf)

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0029294

Cross Reference

CAGE Codes

80539

Sps Technologies, Llc Dba Aerospace Fasteners Group Div Aerospace - Santa Ana

U.s./canadian manufacturers

9009H

Jednolity Indeks Materialowy - Uniform Material Index

Government departments or units, including military organizations

56878

Sps Technologies, Llc Dba Pb Fasteners

U.s./canadian manufacturers

06725

Sps Technologies, Llc Dba Air Industries Company Div Air Industries Company

U.s./canadian manufacturers

81755

Lockheed Martin Corporation Div Lockheed Martin Aeronautics Company

U.s./canadian manufacturers

1EM77

B & B Specialties Inc Dba Gs Aerospace Div Gs Aerospace

U.s./canadian manufacturers

27624

Sps Technologies Llc Dba Pb Fasteners Div Pb Fasteners

U.s./canadian manufacturers

0K6Z0

Saturn Fasteners Inc

U.s./canadian manufacturers

06710

Valley-Todeco, Inc. Dba Arconic Fastening Systems

U.s./canadian manufacturers

92215

Howmet Global Fastening Systems Inc Div Torrance Operations

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

48950

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

093486

Schedule B & Trade

Schedule B

7318-15-2000

Description

bolts and bolts and their nuts or washers exported in the same shipment

End Use

12110 - Iron and steel products, other

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69421

(NAICS) North American Industrial Classification System

332722

Questions & Answers

1. What is the FSCG of the NSN 5305-01-054-6279?

   The FSCG of the NSN 5305-01-054-6279 is 5305

2. Does the NSN 5305-01-054-6279 have a Schedule B code assigned?

   Yes, the Schedule B code is 7318152000

3. Does NSN 5305-01-054-6279 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5305-01-054-6279 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5305-01-054-6279 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5305-01-054-6279 was assigned to the Federal Catalog?

   It was assigned 48 years ago, on Mon, Jan 23, 1978