NSN 5325487

A transformer consisting of one or more primary winding(s) and one or more secondary winding(s). It may be designed for direct connection to an alternating current source for purposes of changing the secondary volts and amperes or designed to eliminate metallic interconnection between circuits in an overall one to one voltage ratio, with or without additional output windings, or items designed to automatically maintain a constant output voltage within specified limits under varying input or load conditions. Also includes items having a provision for mechanically changing the turns ratio or inductive coupling in progressive increments by means of voltage taps, ratio adjuster, or devices oe similar design. For transformers having winding(s) common to both input and output circuits, see transformer (1), power, autotransformer. Excludes:transformer (1), pulse.

0.250 inches nominal fork arm thickness, 1.000 inches nominal end radius, 1.062 inches nominal fork depth, 0.562 inches minimum and 0.572 inches maximum fork span width, 3.312 inches nominal distance from pivot pinhole center to rod connection end.

NSN 5340-00-532-5487 Datasheet

(NSN) National Stock Number

5340-00-532-5487

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

00-532-5487

Requires Demilitarization

Yes

(INC) Item Name Code

03796

Date

Tue, Jan 1, 1963

Distance From Pivot Pinhole Center To Rod Connection End

3.312 inches nominal

End Radius

1.000 inches nominal

Fork Span Width

0.562 inches minimum and 0.572 inches maximum

Fork Arm Thickness

0.250 inches nominal

Fork Depth

1.062 inches nominal

Material

steel overall

Metallic Hardness Rating

89.0 minimum rockwell superficial 15-n and 91.0 maximum rockwell superficial 15-n

Overall Height

1.000 inches nominal

Overall Width

1.062 inches nominal

Shank Diameter

0.500 inches nominal

Special Features

w/oblong fork armholes 0.498 in.min,0.501 in.max w,1.375 in.lg is parallel to longitudinal axial centerline of clevis arm

Thread Class

3a rod connection

Thread Direction

left-hand rod connection

Thread Length

1.750 inches nominal rod connection

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9I - Defense industrial supply center philadelphia, pennsylvania 19111

Pseudo Item Name Code

0003796

Cross Reference

CAGE Codes

19207

U S Army Tank Automotive Command Amsta-Im-Mm

Government departments or units, including military organizations

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

U - 50.0

National Motor Freight Class Rating

U - 50.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49240

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

094140

Questions & Answers

1. What is the FSCG of the NSN 5340-00-532-5487?

   The FSCG of the NSN 5340-00-532-5487 is 5340

2. Does NSN 5340-00-532-5487 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5340-00-532-5487 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5340-00-532-5487 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5340-00-532-5487 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963